Home Theater Forum and Systems banner

Search results

1-20 of 497 Results
Advanced Search
  1. New Room need to measure and adjust room.

    REW Forum
    It is able to, but applying EQ above about 200 Hz is nearly always a bad idea.
  2. Soundcard calibration

    REW Forum
    Glitches like that in the calibration result tend to be the result of dropouts in the audio data. You can't use a result like that to make a cal file, that just puts the same glitches on every measurement you make with that cal file. Try calibrating again, or doing a couple of runs to see if you...
  3. Can't get passed Initial Setup

    REW Forum
    This would suggest that the mic preamp output is not feeding the selected REW input, otherwise the level would change. Maybe that is some issue with the Xenyx setup or perhaps the input that is selected on the Creative card isn't the one you have the Xenyx connected to, but it is pretty...
  4. Using REW to adjust subwoofer phase.

    REW Forum
    Just select it on the IR windows dialog.
  5. Detect playback failure and soft-reset

    REW Forum
    I'm not quite following that. What is changing? Does the audio output disappear? What output have you selected and what happens to the selection on the soundcard preferences? That preference is for manual deletion of measurements. Having a preference to exit without warning of unsaved...
  6. Measurement naming feature request

    REW Forum
    I'll add that to the feature request list.
  7. Sweep length versus IR Phase

    REW Forum
    Clock rate mismatches are likely with different input and output devices, all clocks have a tolerance. To eliminate them the input and output need to share the same clock. The effect is equivalent to an all pass filter. Magnitude response is essentially unchanged and the phase response effects...
  8. Sweep length versus IR Phase

    REW Forum
    The difference is due to small differences between the clock rate of your DAC and the UMIK. Here are the impulse responses with 21 parts per million clock rate adjustment applied: There is a note in the help about this, added following a similar issue that a user spotted in April: If the...
  9. Sweep length versus IR Phase

    REW Forum
    Please post an mdat file with your measurements.
  10. UMIK-1 is not recognized by REW

    REW Forum
    The current build is 5.20 beta 13. If running Mojave you have to give REW permission to access the mic in the privacy settings or by hitting OK on the prompt to allow REW access.
  11. Missing distortion measurements

    REW Forum
    The cursor frequency appears OK on your capture, is it not there on the screen? Can you attach a screen shot (PrtSc)?
  12. Viewing saved peak data from RTA spectrum

    REW Forum
    5.19 only saves the current RTA data, not the peak data. The V5.20 beta versions have an option to save peak data.
  13. Missing distortion measurements

    REW Forum
    Your cursor is positioned to the left of where the distortion data starts. The figures in the legend are for the frequency where the cursor is positioned.
  14. Differences between HDMI and headphone out

    REW Forum
    Generally aim for the mic tip to be at the centre of the port. The peak should be at the port tuning, so looks to be around 27 Hz.
  15. Hi my name is Mfinzi. My passion is buiding custom gear

    REW Forum
    Sure, just select the inputs and outputs you want to use on the REW soundcard preferences.
  16. Differences between HDMI and headphone out

    REW Forum
    Why not put the mic by the port and make a measurement to see where the port is tuned directly?
  17. Differences between HDMI and headphone out

    REW Forum
    Re: REW V5 Tips Are you using any cal files? Try making loopback measurements from the chosen output (a line level output from the AVR if using HDMI) to the line input to see how they differ. REW is updated quite frequently, so I wouldn't base your decisions on something that was "goofy"...
  18. Using REW to adjust subwoofer phase.

    REW Forum
    Sure, use pink periodic noise on the generator and monitor the response on the RTA with these settings:
  19. REW V5 Tips

    REW Forum
    5.01 beta is an 8-year old version for macs running OS X 10.4 - 10.6 Iggy, the current REW versions are at http://www.roomeqwizard.com
  20. Date stamp on saved graph from RTA

    REW Forum
    I've added an option to include a timestamp on graph captures for the next beta release.
1-20 of 497 Results
Top