I have found a possible bug with REW 5.1 or ASIO4All maybe you can help with. If using the EMU ASIO I am able to loop back SPDIF from input to output, using external clock and matching sample rates ie 96 kHz, works good. But if I use ASIO4ALL (which I need to do to output on HDMI and input on...

my emu card wont calibrate on my rew v5 im connected on right channel with a quarter inch guitar jack to right out to input in. (as my soundcard has 2 separate right and left in/out sockets) and my mixer has no rew fader as it does on my laptop. i have faders monitor wave sw synth and cd on my...

Good afternoon. Set REW 5.0 on an old (very) IBM laptop with Windows XP and Java 2SE-5.0. Using a 24-bit sound card E-MU 0404 USB with "native" drivers. The problem is - when an item is selected E-MU 0404 in the Input Device And Input message appears: "Unable to access the selected device...

Hi, I would like to do the RMAA loopback tests of my E-MU 0404 USB, but I am a bit overwhelmed by all the controls. I was searching the Internet for any tutorials but I couldn't find anything. Has anyone found a good tutorial on this or maybe can answer some noob questions? :help:

I haven't been on HT Shack in quite a while, mostly because I've been using REW with my ECM8000 and E-mu 0404 USB without issue. Until now. It loks like the E-mu has died on me. Either I'm not getting any gain out of either mic amplifier, or the 48V phantom power is dead, or something. I can't...

Hello everyone!! I'll start with REW soon (this is my first post) I have recived the ECM 8000 and Ultracurve in order. I'm thinking in this soundcard: emu_0404_usb I like its I/O digital. I want to connect the soundcard to Ultracurve by optical out. But I don't know how calibrate this...

Hi I have just downloaded REW R5 onto my Win7 PC with an external E-MU 0404 USB Audio I/F. When I try to select the "Digital Output E-MU 0404 USB" as the output device in Preferences, I get a JAVA level error message saying some thing like " Output Driver Error - E-MU 0404 has no lines...

So I guess there's a debate whether or not to include a preamp in a soundcard calibration file. In my case, I have an EMU 0404 PCI interface and a GT Brick preamp. According to REW instructions, I'm supposed to just plug the output of the soundcard directly into its input. However, I'm certain...

I'm trying to make the calibration file for E-mu 0404 USB2, and this is what I got. It's extremely ragged, and I think that something is wrong. Can anyone help me figure out what I'm doing wrong? Setup: PowerMac G5 with OS-X 10.5.8, Using REW V5 (but same problem with V4). M3DMixer is...

I just received a calibrated ECM mic and an Blue Icicle mic pre. I want to use the device with my laptop (Dell Studio 1537 running Windows XP) and properly calibrate my soundcard as well as have a clean audio output (only have headphone out currently), so I'm trying to return the icicle. Ok...

I'm trying to figure out how to use the midi output to connect to my BFD for REW. Has anyone gotten this to work? I have only installed the drivers and am not seeing the midi interface appearing in my system configuration. Do I have to install some of the additional software it comes with? I...

I've Emu 0404 USB soundcard attached to my laptop. I use XLR cable to connect the ECM8000 mic to sound card. Now the 0404 has both 1/4" single output as well as stereo 3.5mm output. What should i connect? I tried both and the curve are very different. the Single connect gives output about -10db...

Question ? Can I use the EMU 0404 with only USB power for line in/line out through my laptop's battery power without using the EMU wall wart power supply for REW? I'm using a Dell laptop (XP Pro SP3) on battery power with the following: 1) a calibrated mic (Panasonic capsule) and 9V battery...

I have used REW with a TASCAM US-144 without to much trouble but it's been a while. I deligated the TASCAM to other duties and I'm trying to use the gernally more flexible EMU 0404 USB device and I can't get past go. I can play music over it to analog or SPDIF using foobar ASIO plugin. But I...

Is this a good starting point for my home studio? I record mostly rap,hip-hop, and r&b. If knowing of my pc is required, the info should be in my signature.

Hello. I am trying to get a home studio started but am finding trouble in which hardware to purchase. The microphone that I plane on getting is the Audio Technica AT2020. The genres of music that I work with the most are Hip-Hop, Rap, and R&B. I am also on a strict budget.($270.00) What are the...

Hello. I am trying to get a home studio started but am finding trouble in which hardware to purchase. The microphone that I plane on getting is the Audio Technica AT2020. The genres of music that I work with the most are Hip-Hop, Rap, and R&B. I am also on a strict budget.($270.00) What are the...

E-MU 0404 | USB 96kHz Testing chain: External loopback (line-out - line-in) Sampling mode: 24-bit, 96 kHz 1/4" to 1/4" on both channels Frequency response Noise Level Dynamic range THD + Noise (at -3 dB FS) Intermodulation distortion Stereo crosstalk IMD...

This is all new to me and Im trying to figure out the proper setting on my sound card so I can run some test on my new Acoupower 15" ported sub. So far I have my RS digital meter going to the right imput of the sound card and the right out put going to my ep2500 amp. When I try to calibrate my...

Newbie. Fast Track Pro or E-MU 0404? or other USB external sound in $200 range? I'm getting ready to finally buy some "real" sub-woofers, and I want to be able to properly calibrate/tune/adjust them as best I can. For many years, I've had a Radio Shack Sound Level Meter- Model Number 33-2050...