Search Results for ‘2496’

Beringer DCX 2496. How to sum channels A and B low frequencies to sub woofer? When using a single subwoofer as I am, isn't it better to have both the left-hand and right-hand low frequencies going to the single subwoofer? Please correct me if I am wrong. At the moment only the right hand...

Hi guys anyone have experience with either of these? I have dual subs and I think they are running slightly out of phase with each other. Both of these units seem to be able to delay signal on each channel individually. But the deq has an auto eq, Rta, a nice display and lots of other features...

Hi, my name is Ariel, and I'm from Argentina. I only speak Spanish, and now I am using a translator. I do not know how to solve the problem I have with my FBQ2496. I only listen to music when the BYPASS function is active. When I turn it off, everything shuts up. Can anyone help me please...

I'm looking for a sub crossover with EQ, and I have narrowed my search down to these. Opinions anyone? Thanks much, Chuck

Hi all, I have a measurement, so I click on EQ to smooth with the filters, but, how do I translate these into my DEQ2496? Frequencies easy, but BW60, they don't match, I got em close, it asks for BW60 at 11, I have 10. How do I add the House curve, I keep reading but it don't make sense...

I have Denon 3311ci for receiver and then to crossover-amps-speakers. The issue I have, I can't get lower than 40hz out of the pre outs. The dcx 2496 has 3 inputs, can I use sub pre out, into crossover along with FL & FR? If so, should I start with a preset on the crossover? Denon 3311ci DCX...

Hi all After setting up my dcx for my 2 subs. Has anybody tried to connect there dcx to a pc, with a usb to serial connector. Just wanted recommendation to which one works with windows 7 64bit. many thanks.

I hope you're are going to excuse my super-newbie question. After having fiddle with my DEQ 2496 now I'm incurred in this situation: the equalizer does process the sound coming from my ECM 8000 but nothing is getting out my speakers but the pink noise internally produced... The system is...

I am using pre outs for the mains to DCX 2496, and then to ep2500, then mains + sub. I am looking for a 101 class on the crossover. This is up and operational, but not dialed in yet. Where would be a good place to start?

pm or email me. [email protected]

After reading tons of useful information on this site i have finally kicked the kids out long enough to have a good play with my bfd.Sorry if i have missed this on my searching but i have managed to apply a hard knee curve thanks brucek ,after trying a flat response which i found a bit tame.What...

Selling two Behringer FBQ 2496 parametric EQ'S. Perfect condition inside and out !!! $90.00 ea. including shiping :T ( in continetal US only ). Post me or call cell @ 602-384-3475, I am in Phoenix, AZ.

Will pay $200 delivered with insurance to 57501. Gob

Hi Guys, Are there any DCX 2496 like sound cards available? A 2.1 or 5.1 external sound card that can function as a 2 or 3 way crossover and equalizer? If it had a REW like function that would be great too. I would like to use it to tune an outdoor movie theater system connected to a...

Just got my FBQ 2496 today and I am a bit confused. Got it set up ok, set levels etc. Ran REW selected filters and sent to the equaliser. The MIDI light flashed on the BFD. So far so good. I then reran REW and got exactly the same FR as before. Questions are 1. Does the FBQ automatically store...

hi there, i am currently in the process of eq'ing my sub, it does need it, thats for sure. I would also like to hipass my mains with a behr. dcx 2496, but if im am correct it cant be done if my mains dont run on a separete poweramp as the behringer need the signal from the surroundamp? is...

I'm hoping someone who uses the FBQ can help me understand what the status display should look like when the PEQ filters are operating. When I set the filters and measure I get the same measurement curve as when the FBQ is in bypass mode, so the equalization is not happening. I can't determine...

Hello Everyone, I am hoping for some coaching on how to use the FBQ 2496. Please disregard the second graph, I couldn't figure out how to remove it once I started the post. The first graph shows what REW recommends for filtering and how the new curve will look. I've been reading Wayne's house...

this used to really annoy me on my older 1124P does the 2496 also suffer from it ? I was always worried to whether it would damage the subwoofer thanks, Mark.

My goal is to determine the current frequency response of my system - originating from a Marantz CD player - and use the Behringer DEQ 2496 to flatten the response over the audio spectrum. I am thinking of using a Behringer ECM 8000, and E-mu 0404 USB. Is anyone using this setup? If so, does...