Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 24 Results
  1. Electronic Processing/Equalization Devices
    First post here, excuse me if I missed something obvious. I’ve been doing some research lately and there’s lots of outdated and conflicting material out there which makes it confusing for DSP newbies like me, I just want to get the purchase over with today! ?So i can concentrate on the model...
  2. REW Forum
    Hi there, Brand new to this. I have a miniDSP 2x4 (not the HD version), and a UMIK-1 mic coming in the mail. Already downloaded REW for windows. This is going to EQ my two subs only, on a 2.2 channel setup, 100% music only. Preamp is Halo P5, and dual PSA s1500 subs I tried to read...
  3. Classifieds - Wanted
    Still looking for a 2x4 Balanced MiniDSP. Can be the board by itself or with the enclosure. If you've got one let me know.
  4. Electronic Processing/Equalization Devices
    Hi, my name is Philipp and i came across this board searching for more information about REW and especially REW in cooperation with a miniDSP 2x4. There a many tutorials out there, but most cover EQing a subwoofer or require familarity with acoustics. In my case i like to linearize the sound of...
  5. REW Forum
    If I want to apply some boost to sub EQ to avoid the need to cut everything greatly to the same level (which is my current approach), what guidelines should I follow? I want to do generate auto filters in REW and where should I set max individual filter boost and max overall filter boost...
  6. REW Forum
    Hello all, I have finally gotten my subwoofer system up and running, so now it's time to EQ my subs. Here's a little bit of background on the equipment. AVR: Pioneer Elite - SC-65 Front L/R Speakers: 1963 Bozak (2x12" woofers in each cabinet) *I know, not the best choice for home theater...
  7. Electronic Processing/Equalization Devices
    So basically I got a flat response with minidsp, but, I pulled down my peaks so much that it squished the entire output. Now, my subs are really quiet. Tried to increase gain on the amp and increase output on the receiver but its not enough plus its picking up noise. I thought I could bump up...
  8. Electronic Processing/Equalization Devices
    Hi all, This is my first post here and my english is not very good.. I just bought another svs pb13u to do dual,i already got marantz 8801 as everybody know got bass management to setting dual subs and i just learning rew. Do i still need minidsp 2 x 4 to get better bass calibration?Is it...
  9. Audio Processing
    I will be buying a minidsp in the next couple of months and I'm not sure if I should get the 2x4 or the 2x4 balanced. I have an onkyo tx-sr501 connected to a crown xls 1000 with a samson s-convert. If I understand correctly, I could use the minidsp 2x4 before the s-convert or the balanced...
  10. Electronic Processing/Equalization Devices
    Good morning I just finished building a second Micro Marty with the Dayton RSS390HO driver. The first one uses TC Sound LMR-15 I also bought a used EP2500 to drive the second Marty. BEcause i need to rearrange my HT configuration i stacked the Micro Marty on top of the first one. After...
  11. Electronic Processing/Equalization Devices
    Greetings, I'm looking into the MiniDSP 2x4 to use as a crossover to high pass my mains and low pass my sub. The specs state the max input voltage on the 2x4 is 2.0 Vrms (rev b). I'm currently using a DSPeaker Dual Core as a DAC & Preamp, which has a max output voltage of 7.2 vrms. Given...
  12. Electronic Processing/Equalization Devices
    Quick question. I plan to utilize one MiniDSP 2x4 with the 4-way advanced crossover, for each of my 3-way towers. I would have 1 unused input and 1 output left on each unit. Does the plugin allow me to than use the extra in and out for running my sub and/or center channel? Basically, are both...
  13. Electronic Processing/Equalization Devices
    Just got my new Minidsp 2x4 today . I have 2 subs hooked to a Y cable from a mono out on my XMC-1. I took out the Y and put a cable into input 1 of the minidsp and connected my subs to output 1 and 2. I only get output from one of the 2 subs, if I reverse the cables the other sub works so it...
  14. Electronic Processing/Equalization Devices
    I built a Martycube with a Stereo Integrity 15" D2 woofer. Its wired to be a 4 ohm load. It is driven by a Dayton SA1000 plate amp. I have an Integra DTR 5.9 which just has Audyssey 2EQ. I plan to hopefully upgrade later this year to a Marantz 7008 or 7009 with XT 32 and SubEQ in it. I've...
  15. Subwoofer Amps | High Pass Filters
    Anybody used unbalanced cables to balanced minidsp 2x4. The manual states I cut one end off and screw the wires into the Phoenix connector. Seems easy enough. I need the 2v output for my crown xls2000. Anybody got any experiences with these connections? Good and or bad?
  16. Electronic Processing/Equalization Devices
    Hello, I have a MiniDSP Balanced 2x4 with 2way Advanced Plug-In. I've been delaying hooking it up but now the time is getting close. I have (3) subs, Denon x4000 AVR with dual sub outputs. I'm looking for advise on hook-up. I believe the MiniDSP input 1 feeds outputs 1 & 3, and Input 2 feeds...
  17. Home Audio Acoustics
    Have a local company where I can buy 2x4 slabs of 2" thick 8lb density minwool panels for $0.52sqft. They come 6 panels to a box of 48sqft total and the price is phenomenal at $24.96 a box. Gonna pick up 3 or 4 boxes tomorrow depending on the verdict here. is 8lb density too thick to absorb...
  18. Classifieds - Equalization & Calibration Equipment
    Selling a minidsp 2x4 unbalanced. Includes a power supply as well as the 2.1 advanced plug-in. sold
  19. Electronic Processing/Equalization Devices
    I was looking at replacing my SMS-1 with a MiniDSP 2x4 unbalanced. I emailed the company and they are recommending that I purchase the balanced version (which requires some rather inconvenient and inelegant wiring). They said that it is because the 2x4 unbalanced output voltage is only 0.9V...
  20. Classifieds - Wanted
    Title says it all. Looking for a 2x4 MiniDSP kit & UMIK-1 MIC. Would need them shipped to 46268 from wherever you are. Let me know if you have one you'd be willing to sell.
1-20 of 24 Results
Top