4000

Hi! I have played with miniDSP 2x4 HD for some time now and try to do some DRC. I have measured at listening position with B&K mic, focusrite 2i2 soundcard. Measurement results for phase are too weird, or am I understanding something wrong here? picture I am trying to do phase corrections...

Good afternoon Anyone could help me and point me in the right direction I am looking for replacement screws for the EP4000 chassis, I called a few Behringer dealer none has that listed as a part , went to my local reno depot did not have that kind of screws Thank you for your help Alain

I recently acquired one of these amps from my job. Has anyone ever used any of the CDI series before? They are awesome. USB connectivity to my HTPC allows me to set crossover points(Including going low enough to use as a HPF) among other things. Ridiculous power and customization options. I...

I've managed to wear out my bulb, with the help of my family and friends, of course, and I'm wondering if anyone else has experienced the symptoms I am. First the replace lamp sign appeared, and disappeared. Now it doesn't go away, and the PJ turns itself off after 10 minutes or so of use. I'm a...

I am not too satisfied with the blacks on this PJ yet, it's my first PJ so I have no prior expereince to go off of, but I was expecting a bit better. Now, when I say blacks, I mean when a movie shows a mostly black scene, cave scenes in "The Decent", beginning scene in "The Matrix" and the...

I am looking at using a Crown XTi 4000 or XTi 4002 instead of some SPA-1000s for a sub running 2 cabs (stereo pair with electronic xover), two each LMS-r 15" per cab with independent cabinet space at 225L each, ported low 14.75Hz. I would like to set it up so only one driver is running form...

I'm trying to decide which one to go with. The price points are the same, and both stores offer the 92" motorized tab tensioned screen for roughly the same price, so it boils down to the projector. Any thoughts as to which one is the better machine?

So I'm getting ready to embark on a journey which is familiar to some and completely new to me, so I've got a lot of questions, some kinda dumb, some not so dumb. I want to lose the PSW1000 and add a Crown I-Tech 4000, either a LMS 5400 Ultra or LMS Pro 5100, and two 18" PRs. Do any of you...

Hello, Im going to build a subwoofer but I also need an amplifier for it.. could anyone tell me if the Crown XTi 4000 is suitable as a HT subwoofer amp ? I've searched google but I cant really find a conclusive answer to this for home use.. It seems like a nice amp with all the EQ stuff in one...

first i want to say hello to everyone here today is my first day i am happy to be here i read lot`s of thing here before becomes a member thanks guys you are great. Here is my question about my ep 4000 i bought a month a and half a go iam running thease two speakers 500 rms each channel and...

Hi all, a question here. I have a Behringer EP 4000 that I plan on using to power 2 of my 3 subs, my question is, does anybody see a problem with running 1 sub with a 4 ohm driver on channel 1 of the amp and sub 2 with a 8 ohm driver on channel 2 of the amp. I see no problem in this, the 4 ohm...

Hi. I have ordered a Behringer EP 4000 for my dual DIY subs, and I want to order a fan to do the fan mod. I have seen the treads about this subject, but I cant find the mA size of the original fan anywhere. I will try to find a fan in Europe or even better, in Norway, but I don't want to put in...

Seems these would be close in competition and both look like winners, has anyone seen both and have time to share impressions? Thanks

Hello Guys, I'm looking to build my 3rd diy sub. A major hurdle for me is selecting the amp. I do not have a driver in mind yet. But i'm curious of which amp to get between ED 1300 watt sub plate amp or Behinger 2500 or 4000. Is one better than the other? if so, why? i'm not pro with amps or...

Hi, I have an Infocus projector IN76 and it's about 3 yrs old now. 2 months ago I received a warning on startup that I should replace the bulb. This lasts for about 5 minutes then disappears. Seeing the warning, and recalling the warning my retailer told me of 20 hrs of life left in lamp once...

I have just had an email back from behringer with regards to the switches and guess what. What they say doesn't match up with what it says in the manual. Their settings for bridged are: The manual says: 1,6,7,10 are to the right and 2,3,4,5,8,9 are to the left See what I mean. I get a better...

I was looking at these amps to add to my collection. I have a Crest CD-2000 already. I want another amp now though. Do those amps need a mod to play below 30 hz? I noticed they have a switchable 30 or 50 hz cutoff. Can that just be turned off?

I was planning on using an extra MTX Thunder 4000 12" 4 Ohm driver for a first home theater sub project using a Dayton 240W amp for power in a 1.25^3 foot sealed box. A friend of mine said that this wouldn't be a good idea because it is a car sub and that I could buy a better one pre-made for...

hi everyone i havent been on the shack in a while. but i have a tc sounds lms 4000 that im gonna use for hometheater. well ive tried using my winsid and its not working right. so can someone help me some up with a box for my room ill get dimension in a lil. but all i have to work with is a...

I have owned an Amiga 4000 (made by Commodore) for many years until recently, I would love to get one again as it made a very good video editing machine combined with the Video Toaster Flyer that I still have. This may be the time to dust off the cobwebs in your attic and in the garage and see...