Home Theater Forum and Systems banner
4311
1-10 of 10 Results
  1. Home Theater Receivers | Processors | Amps
    I just picked up a factory Refurb 4311 and I can not seem to get the SW2 (subwoofer 2) preout working. I have enabled two speakers for the subwoofers in the speaker config menu. No sound comes out of my 2nd subwoofer when it's connected to the SW2 input. When I plug it into SW1 input it works...
  2. Home Audio Speakers
    As title says. I have shortlisted the following Monitor Audio BX6 range B&W 683. Ideally the choice I make has to live with me for years. I feel my current Missions M35i aren't up to the job. Ideas welcome guys
  3. Home Theater Receivers | Processors | Amps
    I currently own a two year old Denon it's a 7.1 receiver but because of space I can only do 5.1 and am using the second zone for patio music. Anyways I want to upgrade to the xt32 version of Audyssey and both the 4311 and 818 have it on board but I can't decide which receiver would be better of...
  4. Home Theater Receivers | Processors | Amps
    Hi, there Shaksters!:) Been a while since I was busy hometheater building! It is getting completed and while I was dreaming of setting it up nice and proper, my Denon 4311 ( 5months old ) developed trouble.See it starts with power on but there is no output from the...
  5. Home Theater Receivers | Processors | Amps
    For several years now I have always had to adjust the subwoofer levels on my receiver/prepro to make the bass louder for CD music and DVD/BD concerts... or concerts on satellite as well. It seems the bass is always fine for movies. I suppose this is due to the 10db LFE boost encoded in movies...
  6. Home Theater Receivers | Processors | Amps
    I have suddenly encountered a video issue with my Denon 4311 receiver. Each time I power up my home theater system, all I get is blue screen through my projector. There is no video. I can actually fix the problem by unplugging the power to the receiver, but as soon as I power down normally...
  7. Home Theater Receivers | Processors | Amps
    Hi All. First post. I recently bought a Pioneer sc 55 to replace my sc 07. Found it was a slight upgrade. I've been thinking about a Denon 4311 while i can still return the Pioneer to BB. My speakers are all Mirage (omd 15,c2) I have an anti mode 8033 for my SVS sub. I can pick up a 4311 for...
  8. Home Theater Receivers | Processors | Amps
    Can anyone tell me about the avr 4311 updating issue? Mine is a new one and while I was updating the power went off ( common in our parts).After that the display shows that the avr is trying to update but fails.The display shows "Ether SBL" update and 9min as the time required but nothing...
  9. Home Theater Receivers | Processors | Amps
    Denon 4311. Can someone tell me how I adjust speaker frequency individually
  10. Home Theater Receivers | Processors | Amps
    I'm trying to decide if I should sell my Denon 4810 and get the 4311. Mostly because I'm about to get the Samsung 63" plasma 3D which comes with the free 3D bluray and glasses kit. As most of you know 3D requires HDMI 1.4 thus the main reason for upgrading as I don't want to have to run 2 HDMI...
1-10 of 10 Results
Top