After many hours of research and frustration, im still unable to find a way to wire my subs up correctly. It may be that my 2 subwoofers are unable to be wired at the correct impendance for my amp.
I have the 4 channel Fusion PF-4004 amp, found here: [link removed because of post count]
I've been sitting on this amp for a while and was finally considering using it. I initially saw some places had it listed with specs for 4ohm bridge, and that is actually what I bought it for. I can't really find alot of info on it. I have since read someone say it is not capable, is why I...
Santa is bringing the bass!
Ok, I am in planning and purchasing mode, I've done a lot of reading here and after much learning much about IB subs here - I have the bug. I have made up my mind to do it and shore up the wall to reduce the vibrations. I will be ordering components near the end of...
Hi, I am looking for a Dayton 15" QT-385-4 Quatro Subwoofer 4 Ohm. Im pretty open to what ever sub you have with similar specs and power ranges. However, I have a very low budget for a sub considering PE has these for 75 dollars right now. Just let me know what you have.
My Quest 3004 has oodles of power for my needs but its annoying me due to its fan noise. Looked into modifying the unit but decided not to go that way.
Please make some suggestions on what else is out there at or over this power rating and remains quiet ?
Anyone tried one of the...
I thought i would make a different topic for this, since it was all getting a bit cluttered. Basically, I am considering selling my 607 Onkyo and buying an amplifier which has the capacity to drive 4Ohm loads. Im told that my current amplifier will most likely not be able to cope.
I need it to...
I have been told that its possible to put two front 4Ohm speakers on Onkyo 607 amplifier, with two side 8 Ohm speakers as well.
However, I would like confirmation of this, since my amp seems to have a universal Ohm setting for all the speakers, and if I set it on the 6-8Ohm setting, im not...
DO you think:
2 bridged EP2500's
a Marathon 4050
Or... Some other amp (marathon dj series?), would be the cheapest way to 1000w/channel at 4ohms.
It is so hard to judge specs vs real world output.
Would also like something I can fan mod.
Hello to all, i"m here about a 2 days, reading all post that regards to subwoofers :)
i"m planing to add a subwoofer to my bedroom ( about 3 x 4 meters ).
what i have for now:
2 x Wharfedale Athlantic 400SE floor speakers
1 x Kenwood KRF-V5100 Receiver/Amplifier ( 6ohm version ) connected to PC...