Home Theater Forum and Systems banner
50hz
1-6 of 6 Results
  1. REW Forum
    Hi Guys, I guess this question should be placed here: I recently got a Behringer UCA 202 USB soundcard and a Galaxy CM-140. Since I don't own a stereo jack to RCA just yet, I tried a mono jack to RCA as well as a composite jack to RCA, which immediately both showed me much higher dB levels on...
  2. REW Forum
    Hi All, Finally got around to taking some readings in the bedroom last night. I've got a littleish 2.1 system with some DIY 5" 2way boxes and a DIY powered 10" sub. I've noticed that music doesnt always sound so great, and figured that the sub was poorly tuned. That is, sometimes the bass/kick...
  3. REW Forum
    When I do the signal generator through my computer speakers at 50Hz, sine generator, I don't hear anything. I haven't hooked it to the amp yet. Just wondering if I'm doing things right before I hook it all up. Does that mean it's because my computer speakers don't go down to 50Hz? It's a...
  4. HDTV | Video Displays | Processors
    I've got a couple of Samsung plasmas which, being US models, are limited to NTSC and 24fps framerates, whereas the European equivalents support NTSC, 24fps as well as PAL framerates. Since I moved from the UK I've got a small portion of my collection in PAL (mostly TV stuff that was originally...
  5. Home Audio Acoustics
    Hi, I have been researching how to reduce my decay time of the low frequencies( 100hz down to 30hz) in my room. I know these frequencies are VERY hard to tame because of size and all that. I have read master handbook of acoustics etc etc, plenty of mfg's education articles and videos, but...
  6. Home Audio Acoustics
    So below is where I am at with no room treatment (to speak of anyway). This is stereo dipole speakers (Carver Platinums) with no sub and no intention of adding one. I've got a null centered at 50hz and this is as good as it gets with speaker placement and combination of open/closing...
1-6 of 6 Results
Top