Home Theater Forum and Systems banner
adhesive
1-5 of 5 Results
  1. DIY Subwoofers - General Discussion
    I am going to build a huge box and am planning on layer some half in ply I have with three quarter MDF. I would assume I would want an adhesive that will stay pliable to help dampen the vibrations I would expect from panels this big and also prevent some transfer of energy to my house since this...
  2. Home Theater Design and Construction
    I am having difficulty getting foam panels and corners to stay stuck! I've tried 3M Super 77 and 99, applied to wall and foam. Waited for it to tack and then put in place. Stays stuck very well for a few days and then they all just pop off. I'm wondering if the propellant in the adhesive is...
  3. Home Audio Acoustics
    I've decided to make my own acoustic panels so I ordered a few things last night. 6 panels OC703 24 x 48 x 2 inch 3 panels OC703 24 x 48 x 4 inch 10 yards black burlap and some misc fasteners. I noticed that they also sold spray adhesive but I'm not sure if that's the way I want to go. I...
  4. DIY Subwoofers - General Discussion
    I have come to a stand still. I am so scared to pic the wrong adhesives and sealers for my sonotube subs because the end caps were custom and cost a lot of money. I will list what i need to seal and the challenges and finally some things i considered. 1. Top end cap to 8" port Challenge...
  5. DIY Screens
    I bought some projector screen cloth (vinyl style BOC) from an eBay dealer and I constructed a 140” screen using 2.5” x 1” pine from Home Depot (measurements from memory). The frame was strengthened with 5 vertical braces and metal “L” shaped brackets at every join. I stapled grey felt to the...
1-5 of 5 Results
Top