Search Results for ‘adire’

Hi guys. I've got some awesome EV SMX 2151 15" pro woofers used in a stage monitor that have pretty good specs for a high output woofer. I know they're not subs but I am wondering how they might work with the Adire Audio 15 PR which has the following specs: SD 824CM2, CMA 1.25MM/n, MOVING...

I'm looking to replace the 15" adire audio tempest driver I've been using for the last 10 years. The enclosure is 194 liters (6.85ft3) tuned to 18.8 hz with two 3 inch flared ports with a center section of 5". I'm using a Reference Gallo Sub amp bridged to mono that produces 650 watts into a 4...

Hi guys. I am helping a friend with his mancave project. He has two large walk in closets with double bifold doors in the corners of his 18' L x 17'W room. The closet openingis approximately 60" wide. There is a 6' wide gap between the closets which are 24" deep. I am considering installing...

I've got a 13.25" OD Kipsch RT-12 woofer it these specs. Re 5.63, fms 39.7Hz, qe .68, qt .61, sd 51484, .5893 cf 16.6l mms 361.86, cma 4.31 senstivity 8.59 I'm wondering if how one or two Adire PR-15 passive radiators will work with this sub and box sized added weight. PR-15 has...

Hi all, back again. Been out of the game for awhile, made a move across the country (Ottawa to Edmonton). Setting up a new HT and have most of it in place, except the sub. I am now in a townhouse, which takes all the fun out of home theater, but what can you do:ponder: I really don't want to get...

I was going through my basement today and found an old Adire Audio PR-15. I was wondering if anybody has the specs for this passive radiator. I have been using Google but just cannot find anything. I need Vas, Fs, Xmax, Qms, and Sd. Thanks!

EDIT: SOLD I've got a 15" Adire Audio Tempest Subwoofer for sale. Works great, looks okay. $100 + shipping OBO. I'm in Austin, TX. Please PM me instead of just posting on this thread.

I thought Adire was a out of business, yet I see all these DIY threads for them....confused...

This is a narrowed focused discussion inspired by Owen Bartley's WMTMWW thread. Thank you Owen for getting the proverbial juices flowing. :) A huge thank you to HTS. Ideas flow freely here and I have never felt, even in spite of my knowledge level, intimidated to post a question. Excellent...

I recently found what was listed as an 18" Maelstrom new nearby for $150. Thinking it was a maelstrom x, I decided to get it. Turns out it is a new in box Adire Audio Maelstrom 18" sub, and went ahead and got it. I figured that it was a good sub for the money, and I could use it for a year or...

Adire Audio Owner-"needmorstuff" 12" DLP12 - 1.1 cu.ft. (33 Liters) sealed. http://www.hometheatershack.com/forums/diy-subwoofers/13373-3-subs-winisd-critique-if-you-can-spare-moment.html Owner-"ModMark" 12" Shiva - 5.2 cu.ft. (147 Liters) tuned to 18.5 hz...

Hi, can anyone tell me if the mounting holes for the Exodus Tempest are the same as for the Adire Tempest? I am thinking of replacing the Adire ones with the X2 as they seem to have a significantly larger Xmax. current setup is 2 tempest facing each other in an IB setup thanks Murray

without going crazy with software etc... would a adire audio dpl 12 be ok in sealed cardboard tube roughly 3' long. I get the volume to be about 60 litres. can i just knock this together or are there others things to consider? ts for sub...

Thanks to Mike P. for his generous offer Adire Audio Shiva 2, I have finally completed my subwoofer project. I am still unemployed but at least I have a home theater system to get away from my worries. The design.. Downfiring sub with a 17" x 4" flared port (Parts Express). Cabinet size, 21"...

So this is my first post and I'm sure everyone has heard this a lot but I am very new to the scene and doing my best to learn. So after 4 years of sitting in the box I decided to tackle the Shiva, I went with a 54l sealed enclosure and got a wicked deal on the Bash from Mark at Mach 5. So i...

Hey yall This is my first DIY speaker. I based the design on the Adire Tempest Adire Alignment plans (214l tuned to 15.4 Hz). I moved the driver to the front of the cabinet, 3" from the top because of space limitations (natural problem with this sub). I also moved the cuts in the braces to...

Hello, I was wondering if anyone is familiar with this company. I'm sure you know they closed a while back. A few years ago I built the sealed version of this kit (mtm, 8" woofers, 1" tweeter) and can't find the plans for the ported version. If anyone knows the dimensions of the ported cabinet...

Ok, lets see how I am progressing. I did read up on baffle step's and what "2nd order" filter means, I getting there :-) My summary, no-brainer concerning a closed or vented box, go with vented but which kind. Between a extended bass shelf or the QB3 alignment, the SSF in my plate amp (Part...

well i got this sub from fastimes around month ago CA member. was gonna trade it with another member, but he ran into money troubles im looking for around 200+shipping or trades for car audio. just lmk sub is still stiff. the only power this sub has seen from me was off of donpisto's pdx free...

Notice some are using Tempest subs. I just google'd Adire Tempest and it shows they are out of business. Now where is everyone getting the Adire Tempest subs from? :nerd: