Home Theater Forum and Systems banner
adjust
1-10 of 10 Results
  1. REW Forum
    Hey All, I had bought a U-Mik several years ago and ran some measurements but never fully understood what REW was all about.. I sold the U-Mik as I did not really understand it's worth. Now some years later I have a better understanding of REW and why we need to take measurements.. My Old room...
  2. REW Forum
    I was just thinking (scary...) it might be useful to be able to adjust sub integration in real time. What I mean is to have the mic at the listening position, your computer running REW near the sub, send 10-250hz pink noise through the appropriate channel(s) covering the speakers you are trying...
  3. Home Audio Subwoofers
    Okay..not really sure if this is possible or not, if it is I would greatly appreciate some steps to take on optimizing a home theater with Continuously variable phase control circuits. Alright I have two of the same subs in two different positions in my HT and both subs have Continuously...
  4. System Setup and Connection
    My pair of Infinity 162s have excellent imaging abilities but my new AVR lacks balance adjustments for its zone 2 (or zone "A" as they call it). This basic function (or lack there of) is sacrificing my imaging quality. I love my new upa2 amp but it lacks independent channel adjustments, any...
  5. System Setup and Connection
    I just got a emotiva umc1 and looking to fine tune it. My question is how do I tune the eq to my speakers. I have a spl meter and got everything set to 70dbs. But I'm looking to get the most out of my speakers and would like to start tuning. Thanks
  6. REW Forum
    In the expert articles I've read from here, a step in determining your house curve mentions to adjust the levels of two reference frequencies so they're purceived to have equal output. My question is how am I adjusting these levels? Is this from the receiver trim levels for the sub output, the...
  7. Samsung
    Samsung SP43W6HF has a convergence problem. In the manual convergence (service) section, Green was showing a double image in the horizontal plane in some parts of the grid. Found bad resistors on the convergence board -replaced. Auto-convergence not effective, so I had a good play with the...
  8. Home Theater Receivers | Processors | Amps
    In the HT I have a 7.1 setup . While playing some DVD we find the talking to soft and the sound effects too loud:hush:I have very carefully adjusted the levels of all the speakers to within a couple of db of the sitting area using a Tandy SPM and various test DVD"s . The room acoustics are much...
  9. REW Forum
    Well... I have been playing around with my distance settings on my processor and what it does is help to time align the speakers..... I have been doing it by ear (and tape measure.) Would any of the graphing that REW offers be of good use for this? I want to get the absolute best integration...
  10. HDTV | Video Displays | Processors
    Sometimes the color is "off". Once we had Circuit City come and "adjust" the set to fix color problem. The technician just entered codes in the unit to do so. I would like to know the codes so I can fix myself and not pay the repairman. Is this possible? How can I get the codes?:help:
1-10 of 10 Results
Top