Home Theater Forum and Systems banner
aligning
1-5 of 5 Results
  1. REW Forum
    Hi, I have seen that there are numerous questions on time aligning speakers and there seem to be several approaches to this. Some of these approaches aren't really clear to me and some don't usually work well for the subwoofers. Can someone clarify if the acoustic timing signal can be used for...
  2. REW Forum
    I was trying to display multiple measurements / phases to align a mid-hi crossover, based on a selectable common measurement minimum phase display, and wasn't successfull… Can someone point me in the right direction ? ( Sorry to say, I'm used to Smaart 5 ) Thank you very much and best regards Klaus
  3. Home Audio Acoustics
    Hi all, long time lurker but very few posts. My situation: I own two JL Audio subwoofers and a pair of front speakers. The subs are currently placed on either side of the main speakers, about 1.5m into the room. However, I am thinking of placing the subs in the corners, where they will be...
  4. REW Forum
    I saw a case study that provided good information regarding this subject for aligning the SW to Main speakers. The method I use for aligning a MR (aka MW) to a TW is somewhat different so here it is. This example uses a DCX2496 for XO and driver delays, but the process will be similar using...
  5. REW Forum
    I use a DEQX to PEQ my front two speakers and to perform crossover duties between my L/R mains and subs. I use REQ to determine PEQ settings. The extra digital processing inserts a LOT of incremental time delays (could be 38ms) for my fronts and subs that all the rest of my speakers don't...
1-5 of 5 Results
Top