Home Theater Forum and Systems banner
amplification
1-9 of 11 Results
  1. Subwoofer Amps | High Pass Filters
    I'm just beginning to sink my teeth into the world of hi-fi and have a few questions regarding sub amplification. In my setup I have a basic sealed sub using a Dayton Audio SD270A-88 10" DVC sub with a Dayton SA100 100W plate amp in about a 1.5ft^3 box. Now I am trying to plan out my next...
  2. Home Theater Receivers | Processors | Amps
    I bought a Yamaha DSP-A1 when it first came out and it provided years of home theater enjoyment. About 4 years ago, I bought larger L-C-R speakers and I began to use the DSP-A1 as a preamp for those 3 channels. The preamp outputs for L-C-R were connected to larger external amps while the...
  3. Home Theater System Recommendations
    I was pretty much set on getting Hsu VTF-15H powered sub, but while looking around for a good, used power amp, ran into a DIYer that has 15" passive sub(s) for sale (Cerwin-Vega ported design). Based on the body of work and equipment rack I've seen, which is just photos via text so far, I'm very...
  4. Home Audio Speakers
    Dear Users, I am new to this, forgive my ignorance but i really need somehelp, I'm willing to buy a pioneer receiver VSX-1021. but im unable to match compatible speakers for it, its amplification specs state the following: ›› 120W x 7 (1 kHz, THD 0.05% @ 8 ohms) ›› 90W x 7 (20 Hz – 20 kHz, THD...
  5. Subwoofer Amps | High Pass Filters
    Hi All I purchased a Mach 5 IXL 15.2.2 driver based on a suggestion from Graham (Gperkins_1973) and in part because Mike P. built one and seemed to like it. I'll be posting my build here to thank the community, especially Graham and Mike P, for the input. I am nearly complete with my build...
  6. Home Theater Receivers | Processors | Amps
    I could really use your help guys! I'm relatively new to this game and looking for advice. By the way, I've been a long time listener but first time caller. It's been a great place to hang out and learn. Anyways, I'm putting the finishing touches on my basement project (pictures to come) and...
  7. Home Theater Receivers | Processors | Amps
    Hello everyone. I am a big HT watcher. I built a dedicated HT room in my basement with some high end items. My concern at this point is my rear surround amplification. I currently have an Emotiva XPA-5 which is pushing 200x5 to my L/C/R and RR/LR. I am not certain if I need to add a 200x2...
  8. DIY Speakers
    so ive been deciding on the drivers to use in my MTM 2.1 speaker build and im getting my head around all the finer points of speaker building when it dawned on me that i dont know much about the amplification side of this project. As ive never owned a real amp before i wasnt sure where to start...
  9. Home Audio Subwoofers
    I just bought 2 older Snell 750Thx passive subs and need to Know the best way to wire and power them.The subs are rated at 200 watts @ 8 ohms. I have a Yamaha P2201 pro amp that is rated 230 per ch. @ 8 ohms,But Crown recommends 1.6 to 2.5 the power for the speaker rating, So shouild I get a...
1-9 of 11 Results
Top