Home Theater Forum and Systems banner
applied
1-4 of 4 Results
  1. REW Forum
    I am making gated measurements of individual drivers mounted in the loudspeaker enclosure at a distance of 1 meter. I am using a UMIK-1 with its calibration file and also a seperate tweeter as an acoustic timing reference. My goal is to export SPL and MINIMUM PHASE measurements of individual...
  2. REW Forum
    my multichannel system involves a set of FIR filters, running in jriver, that deal with room correction, bass management and channel alignment (delays). I use REW's loopback timing reference to verify this is working correctly. I don't use a physical cable for this, instead use virtual loopback...
  3. REW Forum
    This may be a dumb question, but is there a way to play and measure a sweep AFTER the in-program SMS-1 filter has been applied? Basically, I'd like to see what the filtered effect actually sounds like, rather than just having a visual representation of the predicted freq. response.
  4. AV Home Theater
    I applied on 1-01-2008 and am awaiting my voucher. If you are one of the many still using an Analog TV and rabbit ears to receive OTA (over the air= free) broadcast TV. You will need to take action before February 17, 2009 if you currently watch TV on an analog TV set that is not connected to...
1-4 of 4 Results
Top