Home Theater Forum and Systems banner
applying

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 9 Results
  1. REW Forum
    I using Cubase and have enabled the Arc plugin on the master out. Now i want to measure with REW through ARC, but i dont know how to do that. I read somewhere that mac users can do this by using a program called Audio Hijack (only for mac) Can anyone help me please
  2. Electronic Processing/Equalization Devices
    Okay Sit tweakalot is at it again :R I'm trying to bring the low end down to 10hz up using bfd, as seen in another thread I applied a big wide boost at 20hz and a big wide cut at 30hz. Through further tests I've found I didn't even need the boost at 20hz, the big cut at 30hz brings it down to...
  3. REW Forum
    Hi, I'm trying put EQ filter data in my DEQ2496 and see what's change in REW measure. Seems something wrong in my operation: the result is worst then the measure with no equalize. Original measure Measure with EQ filter data put in DEQ2496 These are data I put manually in the equaliser...
  4. REW Forum
    I have been reading up on how to apply a house curve to my subs to improve the sound after flattening the response with REW and the BFD. I thought I had the basics covered and was ready to give it a try. Once I tried it and became a bit confused as to weather I was doing it correctly. I am...
  5. REW Forum
    I'm using REW to generate filter impulse responses which I will feed to Inguz (a plugin for slimserver that applies filters and then sends the resulting file to a squeezebox). So the equalization is being done on my computer, not by an external equalizer. I'd like to check how much...
  6. Electronic Processing/Equalization Devices
    Hi, I have a BFD and i am only just getting my head around this. I am ussing REW with radio shack spl meter as mic have taken readings and at the moment just adjusting 2 to 3 peaks, I am using filters 17, 18, 19 and 20 which are all adjustable. When I set to run and start playing films or...
  7. Home Audio Subwoofers
    Hi all, When calibrating SPL levels via pink noise (band limited, 40 to 80Hz), what exactly am I measuring? My layman's understanding is that pink noise is composed of all inclusive frequencies at equal SPL levels (is this somewhat accurate?). That being the case, if I were to calibrate the...
1-7 of 9 Results
Top