Home Theater Forum and Systems banner

av15-x

  1. Acoustic Elegance AV15-X Recommendations

    DIY Subwoofers - General Discussion
    Hello all, I have pretty much decided that I am going to order the AV15-X for my future home theater subwoofer. But I have a few questions. What amplifier should I pair along with this sub? I was looking at the Behringer EP 1500 but I'm not quite sure. I heard the Yamaha Pro Amps were better...
  2. 2 AV15-X, 115L sealed subs

    Sealed Subwoofer Build Projects
    Ive delivered the last subs I built (well it got collected), and moved on to this project now. These are as per title and using the drivers I know well. These will be forward firing single driver cabs, that will eventually be finished in gloss black. They are 115 litres each, minus driver...
  3. AV15-X, 100 litres, 500 watts, 18hz

    Ported Subwoofer Build Projects
    Thought I would share a sub build I have planned and will start sometime in the not to distant future. Most of the info is as per title. This will be around a 100 litre cab as per the recipients requirements, ported and tuned to 18hz using a 500 watt plate amp. Currently the owner is looking at...
  4. O-Audio 500W Amp + AV15-X + 80ltr Sealed = Blown fuse!

    Subwoofer Amps | High Pass Filters
    Hello, Looking for a bit of help. I have just installed one of the O-Audio 500w bash amplifiers into an 80ltr sealed enclosure, with an Acoustic Energy AV15-X driver. I am using the subwoofer pre-out on a Denon AVR-1910 amp for a signal. Testing it for the first time, and after a quick set...
  5. AV15-X Push/Pull DIY Build

    Sealed Subwoofer Build Projects
    Ive started building my own DIY sub (last night) and thought I'd share it with everyone. Background info is as follows. I'm using a Behringer EP4000 for power, 2 15" Acoustic Elegance Drivers, and the cabinet is constructed from 1" MDF and yields about 180 litres. There isnt a lot more than that...
  6. Critique this AV15-X build

    Ported Subwoofer Build Projects
    Hi everyone, I'm gearing up to build a ported AV15-X design. I'm constrained by WAF and also don't want a box that is too big that it takes over the room. I'm mostly interested in Home Theater application, but it should also do music. So probably 80 HT, 20 Music. I understand the sub will...
  7. AV15-X build thread.

    Ported Subwoofer Build Projects
    I haven't gotten the sub yet but i figured i could get a head start on the box. The specs are.... Acoustic Elegance AV15-X driver 35"x21.5"x21.5" for a total internal volume of 7.7 cu.ft. 3/4" mdf 19hz tune by either 2 4" ports or 1 6" port 240 watt dayton plate amp for power should be around...
  8. AV15-X project intro 1st thing (WinISD)

    DIY Subwoofers - General Discussion
    After loosing a bid on a 12inch kilipsch subwoofer. I ran across HTS and went to work reading. I impulsivley went over to AESpeakers and Amazon and purchased a AV15X and Beringer2500. After the taking a hit to my pride on loosing the bid and not wanting to pay retail for my sub I put it in my...
  9. Ported 12.5ft^3 AV15-X project (pics)

    Ported Subwoofer Build Projects
    I have been on another forum for a while but I'm not getting much input, so I thought I'd hang out here, and if it warrants it, offer my project to be added to the database for anyone else looking at this driver and design. I chose an AV15-X from Acoustic Elegance and I already have an EP2500...
  10. Acoustic Elegance AV15-H and AV15-X

    DIY Subwoofers - General Discussion
    Anybody have any experience with these drivers? How would they compare in performance with CSS SDX, Soundsplinter and Tempest subs? From some readings that I've done at Acoustic Elegance forums, it seems to me that for the money ($250), this is an exceptional driver, specially with the mid-bass...
Top