Home Theater Forum and Systems banner
avr
1-18 of 233 Results
Advanced
  1. System Setup and Connection
    Page 10 of my vintage Yamaha HTR 5830 User Manual shows the connection of an external video monitor to the Monitor Out socket. I understood that this would enable display of the OSD setup menu, but I cannot get it to work. Please help: how to display the setup menu on any monitor, as truly the...
  2. Home Theater Receivers | Processors | Amps
    Hello, has anyone had any luck with this prob: Blu Ray to Pioneer vsx-84txsi Elite to 4k TV.Non blu ray dvds will pass through and play but a blu ray dvd keeps going in and out every 5 to 10 secs. When this happens TV goes black and the HDMI light on both B/D player and Rcvr blinks. Any advice...
  3. AV Home Theater
    anyone has advice to resolve this prob? Pioneer vsx-84txsi Elite: blu ray to rcvr to tv via HDMI. Rcvr will allow non blu ray movies to pass through to tv but blu ray movies keep going in and out every 5 to 10 secs. Rcvr has been reset and auto is for everything, all connections have been...
  4. Home Theater System Recommendations
    I recently upgraded my AV Receiver to a Denon AVR 2312ci I found at a thrift store for $30! It works very well! The only problem is my old receiver used a passive subwoofer and my new (to me) Denon uses an active port. I was reading that I needed an amplifier to use my passive subwoofer. I found...
  5. AV Home Theater
    Hello All, I am purchasing a new 4k hdtv soon, and I am wondering if there is a way for my 2012 Denon AVR receiver can process the 4k, assuming not, is there a work around or is a new receiver necessary. Thank you in advance to anyone that can help me, I am a novice! Kevin
  6. System Setup and Connection
    hi guys and gals , i recently purchased a denon avr x4000 and am trying to set it up i have an samsung 65" 6500 series 4k ultra hd t.v i am using high quality hdmi cables and running my direct t.v and ps4 thru the avr. i get sound but no picture? i have the hdmi arc running to the hdmi arc on...
  7. REW Forum
    Well, I’m deep in the process of trying to integrate 2 different subwoofers with an existing 7.2 home theater system using a miniDSP 2x4 DSP for the subs. However, that’s not what this post is about. During this process I decided to do baseline measurements of the existing speaker settings...
  8. Home Theater Receivers | Processors | Amps
    Sorry for this newbie question. Can someone please tell me definitively if the Marantz SR7012 has the ability to assign 8 of its 9 internal amplifiers to 4 surrounds and four height channels? I am upgrading to Dolby Atmos and will utilize a 7.2.4 configuration. I own an Emotiva XPA-3 which will...
  9. Home Theater Receivers | Processors | Amps
    I have been circumventing HDMI compatibility issues for the last two and a half years since I got my 4k tv. I have finally about had it and I am considering an upgrade to a receiver with 2.0/2.2 hdmi inputs to keep compatibility with my 4k60/hdr10 capable system and hopefully last into the...
  10. REW Forum
    Hi, So i've finally got the chance to give everything a good spin on this, it's the easter weekend and plenty of time to mess around. Forgot my charger from work for my laptop but i've got a replacement coming tomorrow and want to be prepared. I gave this another run today based on the advice...
  11. Home Theater System Recommendations
    A friend of mine just bought a condo and is looking to get her system up and running. She has a really old model Onkyo AVR (it was good at the time and still works, but it's old enough not to have HDMI) that needs to be replaced. She'll be setting her system up in 3.1 (not negotiable) and...
  12. Home Theater System Recommendations
    Hi, As most of you know. Have been around for close to a decade. A little off and on over the years, but active. Started out with a KLH AVR from Bestbuy in about 04' with Sony Towers and bookshelfs. Haven spanned all the way to Polk RTi series, I am looking to add-on to the system with a 11.1...
  13. Home Theater, Audio and Video News
    Marantz has bolstered its AV lineup with the announcement of two new flagship products: the SR7011 AV Receiver and AV7703 AV Processor. These are full-featured performers that ship locked and loaded with loads of modern audio and video features. The SR7011 is a home theater anchor with serious...
  14. Home Theater Receivers | Processors | Amps
    Hey guys. i have just aquired a used but great condition pioneer vsx-03txh receiver and bdp-05fd bluray player. I got both for 100$. I thought it was a good price. I have been wanting to do a small 3.1 setup in the bedroom. But what i wanted to know is what would be the preferred receiver for...
  15. REW Forum
    When choosing SW locations another question came to mind when I was choosing from two different distance settings to make in the AVR. I tested different distance settings and landed on 2.7m or 5.2m and they are both good compromises between L and R for support in the XO frequency at 80Hz but...
  16. System Setup and Connection
    Solved my problem of not having a source for the basement system - wife is allowing me to reclaim my Oppo from upstairs (she can listen to CDs using the XBox) so now I can have my music streaming service in the basement but alas - no display! Can't use Rhapsody without some sort of video -...
  17. Home Theater Receivers | Processors | Amps
    I have the Denon AVR X4000 and use it's phono pre-amp stage with my TT. Would anyone venture a guess as to what price range I'd have to start at for an external pre to improve on what the Denon has?
  18. REW Forum
    hi all. iv spent the best part of 8 hours trying to get set up with rew using thethe hardware you can see in the pic im using x2 subs connected to a pioneer SC-LX59 iv tried to follow andrew robinsons Tutorial - Room EQ Wizard on youtube but i get no sound from my sub at the point he does...
1-18 of 233 Results
Top