Home Theater Forum and Systems banner


  1. Whats up with the bash amps

    I have 2 pb ultras w13.5 drivers with the bash amps, and I already replaced 1 of the amps with a sledge and now my other one died, I also had a bad amp on a pb 12+2 a few years ago. Are bash amps junk or what? I'm a little cranky about this, now I have to spend another 500 bucks for a sledge...
  2. Design suggestion needed for Dayton Audio RSS315HF-4 with Bash 300S

    DIY Subwoofers - General Discussion
    Hi, Can anyone help me with designing the box for "Dayton Audio RSS315HF-4" 12" subwoofer with "Bash 300S" plate amplifier. This is my first sub build and I am not sure what to expect. I will be using it for 30% music and 70% movie. I have seen few designs for this but not sure which one to...
  3. Older PB13 Ultra with BASH amp

    Home Audio Subwoofers
    Hey guys, I just purchased but haven't got my hands on it yet...an 08' PB 13 Ultra with the 750rms BASH amp. It will be playing with my existing SB13 Ultra in my HT room. Were there any issues or concerns with the older style BASH amps on these? I believe they are actually an A/B amp...
  4. OAudio Bash 500 replacement

    Subwoofer Amps | High Pass Filters
    Hi, Our OAudio Bash 500 failed and I need a replacement. However I verified that it is no longer avalilable. What are the other options? Any other option with Parameter EQ? External amps can be considered, not only subwoofer amp plates. For information, see below our design...
  5. (2) Infinity REF1262W, 9 ft3, 18 Hz tune, BASH 500W

    Ported Subwoofer Build Projects
    (2) Infinity REF1262W, 9 ft3 (net), 18 Hz tune, BASH 500W F3 at 22 Hz. F6 at 17 Hz. 107 dB at 16 Hz. 111 dB at 20 Hz. 115 dB at 40 Hz. All 1 m GP. SPL is shown at Xmax (13 mm) of drivers. Stock Bash HPF (Fc 17.36, Q 0.817) is included for all graphs. Peak port velocity of 23.5...
  6. SI HT 15 bash 500 (tower sub)

    DIY Subwoofers - General Discussion
    Id like to build a tall tower speaker styled subwoofer using a bash 500 and an si ht 15. The bash 500 i hear the electronics are open on the back side and i was thinking of having my ports external from my 5-6 cf cab but still having them enclosed in a second lower cab.. Use some 90s to get the...
  7. help with amp,,,,,, bash 500???

    DIY Subwoofers - General Discussion
    Hello friends, I am new to this forum and I am very grateful for your participation. Congratulations for the site is very good indeed. I have an audio room approx 60m2 (200 ft2), 33 x 20 feet, and the idea of ​​building a subwoofer using ULTIMAX DAYTON 15 "and amplified by the BASH 500. With a...
  8. Looking for 12in sub for bash 500

    DIY Subwoofers - General Discussion
    Hello all, I picked up an old optimus pro-sw14 passive home subwoofer for cheap. The subwoofer is junk, but the enclosure is in good condition. I bought it with the intent of possibly replacing the subwoofer and powering it with my bash 500 plate amp. The dimensions are 15.25in x 16in x 17in...
  9. Trio 12 & Bash 500

    Creative Sound Solutions
    Hey guys, I wanted to share with you my sub project. After my last sub, which left a lot to be desired, I decided to use the Trio 12 after reading all the good things about it. Originally, I built it with the bash 300 amp, but after talking to CCS, I decided to use the Bash 500. I really liked...
  10. Oaudio Bash 300w HPF

    Subwoofer Amps | High Pass Filters
    Does anyone know the details of the Oaudio version of the Bash 300w amp? I'm curious if it's the same amp as the PE version. I sent an email to Oaudio, but though maybe someone here had traced out the resistors themselves.
  11. BASH 300 blowing fuses

    Subwoofer Amps | High Pass Filters
    I recently finished a new subwoofer build project and installed my same BASH 300 amp and CSS Trio 12 sub and the amp which worked fine in my last sub about 5 months ago is now blowing fuses repeatedly. Anyone else had this problem? It seems like a short but nothing looks wrong with it besides...
  12. O Audio 500W BASH AMP

    Subwoofer Amps | High Pass Filters
    Anybody have an idea when these would come back in stock? Thanks.
  13. HSU VTF-1 BASH amp Repair..

    DIY Repair and Maintenance
    Hey all, I just found this DIY Section. WEll I had fixed my BASH Amplifier in a HSU VTF-1 Subwoofer. I had took it to a local music shop where the owner does repairs and asked for some help and he pointed out the part that may need to be replaced..Well I went home and checked it and the 1...
  14. B.A.S.H. board

    Home Theater Receivers | Processors | Amps
    Are the bash sub boards as good as the web makes them out to be?
  15. Ported SDX10 Build w/ Bash 300

    Creative Sound Solutions
    This is my first DIY sub, and first post on the forum. After 3 weeks of messing around in the garage I came up with a decent result. Output so far seems great, but I may need some adjusment on the HPF. When testing the sub using the opening explosion in Hurt Locker and opening scene in War of...
  16. Bash 500W seems to good to be true

    Subwoofer Amps | High Pass Filters
    I found this website that has the Bash 500W for $124.94. Anybody know if this site is legit? Here
  17. THT-LP and Bash 500 Question

    DIY Subwoofers - General Discussion
    I built a THT-LP powered by a Bash 500W plate amp and there are instructions for altering this amp's output characteristics by swapping out 2 resistors. Does this cabinet design benefit from making any changes offered by this amp?
  18. 15" Dayton RSS390HF-4 Bash 300 Build Help

    DIY Subwoofers - General Discussion
    I'm needing a little help with my pending subwoofer build. I just bought a Bash 300 amp and 15" Dayton RSS390HF-4. I have been messing with WinISD and this is what I came up with. Does this look good for a build? The response isn't completely flat but it's as good as I can get it. The cone...
  19. tstewart's RSS390HF-4 with Bash 300 Sub Build

    Ported Subwoofer Build Projects
    After lots of great advice from Mike P. and many others on this thread: http://www.hometheatershack.com/forums/diy-subwoofers-general-discussion/23124-looking-driver-general-sub-advice.html , I finally started my build a couple weeks ago. Here is a summary: Dayton RSS390HF-4 15" Reference HF...
  20. dayton RF - Bash 300- thoughts?

    Ported Subwoofer Build Projects
    Looking at a 8" dayton driver RSS210HF-4 8" Reference HF Subwoofer 4 Ohm in a slot ported narrow but tall box. http://www.daytonaudio.com/media/resources/295-456-dayton-audio-rss210hf-4-specifications-46171.pdf paired with a bash 300.? I already have the bash. the unit would be used as a...