black widow

Hi folks. I've been reading lots of advice here and I'm trying to make my own 100" Black Widow Ultra screen. I've just finished mixing the paints and the result is... chunky! There are little chunks all through it, maybe 1-3mm in diameter. (I'd add pictures but... first post.) If I pull a...

Hey guys! I'm spraying BW mix onto a 125" untreated brown hardboard (3mm - not the white melamine coated kind). (BTW, I think that's the right term for it. It's called "Faserplatte" in German, and it's similar to MDF but seems a bit more compact.) I'll be using a cheap HVLP gun to apply the...

I would like to paint projector screen that will perform optimally for watching movies in the dark, but also looks good for watching games with a reasonable amount of light. After reading around the net I decided to try mixing some Black widow. I ordered 2 four oz. bottles of the Auto-Air...

I've been having fun with an Aaxa P300 for a few months now, but most of that has been outdoors or simply finding a suitable wall/ceiling inside. Now I've gotten to a point where I'd like to fix up a fairly dedicated "theater" room. The P300 is a three LED DLP business projector rated at a slim...

Hi, I was just wondering if you could help with a couple of questions regarding the black widow paint mix. 1. I accidentally bought the Dulux Wash and Wear 'Low sheen' tinted with Bermuda Beige 427-2 rather than the Wash and Wear 'Flat' :sad:. Would this significantly affect the performance...

Hi, Im new here, but I've been reading the forums for a bit, my current setup is BenQ MS510 and a 90" (4:3) Pull down vinyl shade. I want to paint the vinyl shade with Black Widow, but i've read that the paint will crack due to the rolling of the screen. Some people in old posts have...