blown

I picked up a used dcm sub 712 off of criaglist (I know, I know...I deserve that one) that sounds good at lower, but turning it up a bit, it sounds like there's a rattle going on when the bass gets good. Should I find a replacement driver or replace the whole unit? I don't have much to spend...

Recently started hearing some flapping / farting sound from my sub at low frequencies. Its an old Paradigm PDR-8, so I'm not expecting to rattle the room or anything (I have another sub for the low stuff), but the grille doesn't come off, so I can't inspect the surround or woofer very easily...

Hey Guys, I have a SD-643HD5 it has convergence issues which I can fix. But it also has a really dark picture and the left speaker doesn't work (blown maybe?) I've played around with all the settings of the pictures but it's still incredibly dark, could this be a tube that's going out? If so...

Hey, found this forum looking for help with one of my RS850 signatures which is apparently blown. As AV123 went out of business, it's probably pretty difficult to get parts for it and seeing as it's the whole speaker, it's likely the electronics. I also noticed that Skiing Ninja is currently...

Hi everyone. I currently have a midrange receiver 2 years old ran great! tell yesterday evening, when our family wanted to watch a movie. We all heard a weird noise from the front speakers,sounded like a scratching noise,whoosh sound. So i stop the movie,and i smelled some awful smoke from the...

or is that the death knell of the projector? Pro audio/video fix it place says $2500 to repair/replace but I don't know if that is simply because they want me to buy a projector from them or if it truly is dead. Thoughts?

I'm using them as my mains and when i do a REW measurement (20-300hz) right toward the end the L makes a weird, high, vibrating, buzz (like a misquito) and i'm sure it's the tweeter. speaker exchange has one for $25 but i'd like to explore my options.

Does anyone know where I old get replacement mid bass for my center? Part number is lf zz11460. I would also take a good substitute. Any ideas Thanks Barry

PROJECT CHANGED - NOW SELLING THE DRIVERS ...SEE AD POSTED 5/11 I have two exetremely rare AV123 MFW-15 Drivers "As New" Condition...I have held on to these in hope of finding another MFW-15 enclosure to add to the existing Rosewood MFW-15 I already own...its has not happened. The Boxes /...

:crying: another amp blew up on me. First the Onkyo TX s 608 decided to have HDMI's go bad, got a full refund that funded the new stereo system for my Z3 Bimmer. Then came the Yamaha Aventage 700 ... amp blew up, great video, no sound, currently for repairs under warranty by BB, will be sold...

Well, not sure how, but Chris Botti blew a Swan M 5000 front speaker. So in a desperate attempt to have a working HT, I connected my vintage 1986 Thiel's 2.5 as fronts and Phase Tech 3.5t's as surrounds ... holy mother of home theater!!!!:dumbcrazy: combined with my HSU sub, this thing sounds...

So Im not totally sure what a blown sub sounds like but I hope I didnt blow mine and its just something else Ive over looked. I built a sub with help from these forums about a year ago and its been great since. Thursday night I was having a party at my house and bumping some loud dubstep and...

got an emotiva erm-6.3 for my center. it has been working beautifully so far until yesterday. ive had them hooked up with bare wire, but i was going to put some spades on them, but decided not to and just restripped the wires and hooked it back up. posi to posi, neg to neg. wiring was all fine...

Hi Guys and Gals, I have an older subwoofer and it looks like the fuse is blown. It is a 0.63A/250V or as it says on the Sub 650mA/250v. I went to The Source (radio shack) and the guy told me to just by a .5A/250 as they did not have the .63 or 650mA type. As soon as I plugged the sub in the...

About a month ago one of my two SDX15s blew. We had the system charged pretty well during a party when I smelled the "too hot" driver smell - like Bandaids, then turned it down. A couple of days later I noticed that one of the drivers was blown, yet it was the other one that had that smell. I...

I have an old Klipsch SW10 and recently the voice coil is blown in it's 10" driver. This system uses a K-1013-K 10" driver front, 12" passive radiator rear, with a 100W into 8 ohms amplifier. There is a 180 deg. phase switch but there's no boost or subsonic filter that I know of. The...

Hello, Looking for a bit of help. I have just installed one of the O-Audio 500w bash amplifiers into an 80ltr sealed enclosure, with an Acoustic Energy AV15-X driver. I am using the subwoofer pre-out on a Denon AVR-1910 amp for a signal. Testing it for the first time, and after a quick set...

Looking for blown subs or just the magnet's (motor) that uses 3" voice coils.

I have a Hitachi 51UWX20b. I had a convergence issue where the blue would not properly focus and the auto convergence would stop in the middle. I replaced the IC's but the TV would turn on but would not deliver a signal. I checked the voltages comming into the to convergence board and found I...

Hi guys just join the forum and was directed to this section to submit my plans for your comments. So far I have decided to go with a JVC HD550 projector(if game I might upgrade to at 950),Integra 80.1 receiver ,Mk3 lens( maybe MK4) and CAVX 7.1 custom speaker system with two subs.Room will be...