Home Theater Forum and Systems banner
cal
1-20 of 62 Results
  1. REW Forum
    I did some searching here and a brief amount of reading. I get the impression that I need a calibration file for my Behringer ECM8000? Any helpful hints? Regards, Dan
  2. REW Forum
    Well, I’m deep in the process of trying to integrate 2 different subwoofers with an existing 7.2 home theater system using a miniDSP 2x4 DSP for the subs. However, that’s not what this post is about. During this process I decided to do baseline measurements of the existing speaker settings...
  3. SPL Meters | Mic's | Calibration | Sound Cards
    Hey there, I got my measurment kit since 10 years. It was calibrated by a company that no longer exists. I tried to convert the cal in exel to a 90 degree one like this one in my picture. Don't need that 100% correct. It's just more convenient to measure in 90 degree. Anyone could help me...
  4. SPL Meters | Mic's | Calibration | Sound Cards
    Just got new umik from csl. After REW sees it and I point it to the first 0deg file supplied with the usb sick, REW puts up a mssg box that says it doesn’t contain a cal file. I’ve emailed csl but I figured I’d ask y’all while waiting for a response. Thx! Btw...have y’all done a measurement...
  5. REW Forum
    My new laptop has only one 1/8" port for connecting a headset with a mic. I am trying to find a way to perform the sound card calibration but I haven't found a way to make a loopback cable. I have tried making my own by taking an old 1/8" plug and shorting one of the output wires to the mic...
  6. REW Forum
    When is the mic Cal file implemented? Hi all, I have not been following REW development as closely as I used to, but I noticed that the calibration file for my SPL meter/mic (Galaxy CM140) has been updated since I originally downloaded it several years ago. Yea, I know that a USB mic is more...
  7. REW Forum
    I have a CSL EMM-6 (w/ sensitivity) and a Scarlett 2i2. I used this basic method to calibrate the SPL of REW. I have the mic calibration file loaded in REW as well as one for the audio interface. I take a sweep at a given level using HDMI (ASIO4ALL) from the PC to receiver, say -30dB in REW...
  8. REW Forum
    Hey guys, I have not used my Dayton Mic, preamp, BFD, and REW in sometime. I plan to do some measurements after I made some small changes to my system recently. The issue is I am switching the PC I have REW on and forget what all files from previous calibrations need to be imported? I saved...
  9. REW Forum
    Sirs I'm using REW to understand reverberation time in our church sanctuary and another large room. Not trying to EQ the system. I mistakenly placed the UMIK-1 USB calibration file in the sound card calibration file option box before measuring 12 sweeps. A warning came up to let me know I was...
  10. REW Forum
    Hello! Well, I received my EMM-6 yesterday and had time to play with REW today and golly if I didn't actually get it to work first try. But ..... When I got the mic I was given a web address to download the cal file for it, but it's just a bunch of numbers in Notepad (.txt file) How do use this...
  11. REW Forum
    Hello everyone, I am EXTREMELY frustrated. I am attempting to follow John Reekie's 90 deg cal file process, but for the life of me i cannot figure out how to delete a COLUMN, NOT a line, in wordpad. or any text editor for that matter. i need to delete the amplitude column, leaving only the freq...
  12. REW Forum
    Difference; Internal Vs External Cal Sweep: Maybe someone can help explain the source of an issue I have been struggling with. I need a wav file for both the REW 44kHz calibration sweep and the REW measurement sweep I use (12-20k). Background: I have noted for that SPL and phase responses...
  13. REW Forum
    Hello everyone, I was wondering if it is possible to use REW to create/ generate a mic calibration file that can be loaded into EQ APO so that when I run Smaart6 I can count on the same measurement accuracy I get when using REW or any other software that makes use of mic cal data. Smaart6 does...
  14. REW Forum
    Hey there, I'm using REW since version 4.1. Totally great piece of software. I have a mic/amp combo bought from a local calibration service years ago. Now I have some capsules and a mic lying around which I would love to compare and see their flaws. How do I go about creating a mic cal FR...
  15. New Member Introductions
    Hello all, Been hiding in the shadows for a while and figured it was time to say Hello! I am a bit of an audio nut and build my own speakers and usually heavily modify any that I own. I have 4 systems, two Home Theaters and two audio. My 'real' HT is in the family room, with my home built...
  16. REW Forum
    Howdy I have been using my iSEMcon mic with a Roland Quadcapure. I have been using the digital out connection of the Quadcapture into my DAC to generate the sweeps. It occurred to me that perhaps I shouldn't be using the soundcard.cal with this setup as the Quadcapture is sending digital. Am...
  17. System Setup and Connection
    I have had an onkyo receiver for a while now, but I recently moved into a new apartment and out of respect for my new neighbors, I want to adjust my speakers so it doesn't bother them. Under speaker distances, I have adjusted the values to equal the distance from the main listening position...
  18. REW Forum
    I've used REW with a UMIK-1 to get a few readings to start, but my question comes from my prior attempt to use REW with a UCA202. I had it setup and created a .cal calibration file for it and config'd REW by pointing to it. I've since moved/renamed folders and when I open REW it tells me it...
  19. REW Forum
    Hi all! Just thinking out loud here...(well, typing out loud actually ;-) What issues do you see from doing this? Suppose I took my studio monitors to an anechoic chamber. Analyzed them, and created a Cal file. If I used the same physical setup, distance from monitor, from floor/ceiling etc...
  20. SPL Meters | Mic's | Calibration | Sound Cards
    Hi all, I am currently looking into the accuracy of the YPAO mic that came with my RX-V1800 with the general consensus being more or less what I suspected and that is that the mic is most likely not that flat and the amp contains the compensation data in its DSP. Does anyone know if there are...
1-20 of 62 Results
Top