I calibrated the RME BabyFace Pro sending on Ch1 input a logarithmic sweep (volume: -12dB) generated via Room Eq Wizard at the BF PRO output (loopback sweep). I experiment instabilities (+1.4 dB to -43 dB for 20 Hz to 20 kHz) for a buffer size of 32K (sample rate: 48 KHz).
The mic input is not...
I have recently purchased miniDSP UMIK from the recommendation here, and have been using REW to help tune my modest production studio (mostly mixing / mastering). I've downloaded the calibration file for my mic and successfully loaded it. However, I'm a little confused about whether I need to...
i got the ucm8000 mic, and the u-phoria um2 usb interface, and im kinda lost with how to calibrate REW.
what should connects to what and where?
i tried to search but didnt find straight answer.
thanks in advance!
Having downloaded the latest version last night I cannot get the sound card to calibrate. I've read the help file and checked threads and made the following adjustments:
sample rate to 44hz
increased the buffer to 128
made sure the levels are within 4db
but as soon as I click...
Hi all I am new to this forum and recently downloaded REW to help measure my studio acoustics. To prepair for the soundcard calibration I connected a balanced 1/4 inch cable from input to output of line 1 in Apollo. I switched the output of Apollo's console to line 1 and started the calibration...
At the beginning, I want to sorry for my English language.
I want to measure my home-recording room using Room EQ Wizard and my Apogee One int. Microphone.
I know it's not perfect but I leave on small island in Norway, and I don't have to much opportunities to get better utilities.
I've been searching for an answer on how to do this, and after spending a few days without finding a definite answer, I wanted to ask you guys.
My current set up:
AVR: Pioneer SC-1522-K
Front L/R: Arx A3rx-c
Center: Arx A2rx-c
Surround L/R: Arx A3
I've got a Radio Shack...
I only have a couple of laptop available (and none of the external cards).
Should I calibrate the laptop soundcard?
And should I calibrate both laptops and measure with both to see if they measure the same way?
Hey I just acquired a new to me samsung blue ray home theatre (in a box) model number ht bd3252. I got it from a friend who lost the factory calibration mic. Should I just buy the samsung mic for $15 and use the systems automatic calibration feature. Or would it be worth using rew and...
I have the MP-1r-KIT Acoustical measurement kit, and I have a dumb question.
What is the best way to calibrate the SPL with REW?
I have read the MPR1 manaul which states to place the mic 10" or so from driver, and find 94db LED to light up with 1kHz tone. Then adjust gain until -10dbv lights...
I am running Mac OS X 10.8.3 and just downloaded REW. Unfortunately, I don't have a full grasp of what I am doing yet and just following the help menu, to no avail.
I have a Focusrite USB Soundcard (Saffire 6 USB) and the way I set it up is by connecting a 1/4" cable to the line out...
I am running Windows 7 on Parallels 8 on my MacBook Pro. I am finding it difficult to know where to start the volume/level adjustment setting process.
With effectively 2 laptops in one with 2 volume adjustments for each one(That makes 4 possible settings) and then input/output on...
Hey all, first post here, I'm slowly my head around REW, measuring, and the whole room correction thing.
I've read the manual on how to do a loopback test and it says this:
"Connect the soundcard's line output directly to its line input - use the channel that will be used to make measurements...
I've been using REW without calibrating the "soundcard" thus far - I've been basically taking measurement A, moving/adding/changing bass traps, then taking measurement B, and then comparing to A. It works fine and shows me the effects of my changes. I've progressed to the point where I want to...
The title pretty much sums it up. How would I go about doing this?
Alright, I found this, Basics for Calibrating HDTV 3D Mode. Do I just take my i1 Display Pro, stick it to the inside of my glasses, and press them against the screen?
hi there, i just downloaded REW and i tried calibrating my soundcard, but my input level is not showing up and no matter how high i turn the volume of the pre amp or the main volume, nothing shows up. i am using a mac book pro and an avid mbox pro. can anyone help me out, i would really...