calibrated

Hi, I have been successfully using my calibrated mic with .frd file in REW for some years. It corrects for frequency response, but I assumed it doesn't correct for sensitivity / SPL. However, I recently came across a message in REW that I don't need to go through the sensitivity calibration...

I'm looking for a cross spectrum calibrated umik. If you have one you'd like to sell, drop me a PM. Thanks

I am intrigued by a simple thing as "correct" subwoofer level. Since last week I own a UMIK-1 mic. Before that I always used a Voltcraft analog SPL meter for years with REW measurements and level settings. The SPL meter is comparable with the older analog Radioshack meters. Now with the new...

Is there any way to record short audio files with REW? I am especially interested in this feature, because I don't know which other recording-software would support calibration files for the used microphones. I currently have a UMIK-1 and would like to use this to record short audio clips (up...

my emu card wont calibrate on my rew v5 im connected on right channel with a quarter inch guitar jack to right out to input in. (as my soundcard has 2 separate right and left in/out sockets) and my mixer has no rew fader as it does on my laptop. i have faders monitor wave sw synth and cd on my...

I tried to order a Calibrated MiniDSP UMIK-1 microphone from Cross Spectrum today. At the bottom of the page it says they usually ship in 5 days, but when I try to complete the order it tells me they are out of stock. Does anyone know if there is a way to get on a waiting list? Is there...

Hello All, So after playing with REW and my RS SPL meter as a mic, I decided to get an upgraded mic to see what was really going on so I ordered a CSS Umik Mic. The unit arrived last week and connected up pretty easily. My calibrated mic is down 1.8db at 8hz so pretty happy. Here is my room...

Which is the best out of the two, other than USB being convenient? Thanks in advance

Hi all, Anyone got chance to calibrate or even take a look at Sharp LC-80LE857U? This is Sharp replacement for 844 model. New model isn't full array, but Edge lit. Does 857 have the same ISF profiles and 10 points for color as 844 has? Thanks.

I use B&W HTM1 as a speaker used in REW. Definitely it is frequency-limited to something around 45Hz. +-3dB In the preference section, Target defaults there are certain inputs that I must choose. Bass limited <---- It cannot produce deep bass I have to select this option. Cutoff <---- I don't...

Im about to buy a calibrated mic and will like it to get to 150 dbs. I know Linear x has one like this but will like to have options. Any other one???

Hi All, I'm a new REW user so this may be a basic question! I have a calibrated Dayton EMM6 mic with a datasheet from Cross Spectrum labs. I have used the FRD file that they supplied to give REW a relative response of the mic. I was wondering if the supplied data for my mic is sufficient to...

Hello, I'm interested in calibrating my subwoofer with REW. More than interested - I've purchased a Tascam US-122MKII, which I read measures very flat. I've also purchased a BFD. I'm currently running a Yamaha RX-A810. I understand from reading that my receiver does not perform equalization...

WTB calibrated ECM8000 mic. PM me if you have one for sale. Regards, Dan

I'm mainly using REW for measuring headphone FR. Is there any advantage using a calibrated Dayton/Behringer mic vs a calibrated Galaxy CM-140 for this application; and for room equalization with floor standing speakers? Apologies if this has already been answered.

My fellow Americans/citizens of the world: The state of the calibrated microphone union (at least with respect to the Behringer ECM8000 and the Dayton EMM-6 mics) is... mixed. Dayton Audio EMM-6 - it seems (although I'm not 100% positive) that Dayton has switched suppliers for the 3rd time. In...

Hey guys, new to this but I am starting to build my measurement system. I was looking at buying a ECM8000 but I found a few places that sell ECM8000's that are calibrated and come with a disk with the file. Is there large gains to be had by spending the extra money to get a calibrated mic, can...

Hi All, Here are a couple of graphs of my theater subs. The first is without calibration and the second is calibrated on the 32hz range. I want to make sure that I am doing this correctly. Couple of questions... 1. How do you calibrate another frequency once one is calibrated. I tried to...

Dan Cerio Just pm'd me this message: Contact myself or Dan if you want to hop on this fantastic deal! Buy the cabinets for far less than he paid for them and he will be kicking in the TV for free! Will need optics cleaning by now and probably a trim-up calibration, but where else you gonna...

Dan Cerio Just pm'd me this message: Contact myself or Dan if you want to hop on this fantastic deal! Buy the cabinets for far less than he paid for them and he will be kicking in the TV for free! Will need optics cleaning by now and probably a trim-up calibration, but where else you gonna...