Home Theater Forum and Systems banner

can't

  1. Why can't I get Out and Right meters to balance?

    REW Forum
    Any idea why I can't get the Out and Right meters to balance when running the check levels test? No matter what I do, the Out meter reads about 16db higher than the right meter. Wave volume shows 1.0 but it's grayed out so I can't adjust it. Output Volume and Input Volume are also both set...
  2. HDMI 1.3 to 1.4 Sony firmware can. Why can't the competiions

    Home Theater Receivers | Processors | Amps
    Why can Sony PS3's with a HDMI 1.3 play 3D media? I have two PS3's. One being the old type with the 80 Gig HD and the newer one called the slim? The slim has 1.4 and plays 3D no problems. I did a update on the old PS3 and hooked it up to the Viera Plasma and WA LA, Black OPS in 3D. WOW Hook it...
  3. Can't get Audio Through HDMI from PC (Onkyo TX-SR608)

    System Setup and Connection
    Hi all, I have an ONKYO TX-SR608 and am having trouble getting audio to play from my PC through an HDMI cable. I can hear sound when using the AUX INPUT LINE IN, so I know the speaker set up is correct. Also, I did have audio through the HDMI when I first set the receiver up up, but after I...
  4. Can't open files or save on REW 5

    REW Forum
    The REW program locks up when attempting to either 1)open saved files 2)save a graph 3) import readings. The commonality appears to be any attempt to open the documents folder causes the program to lock up. I also had this problem with REW 5 beta but NOT with the 4 series. The system is Win7...
  5. Can't get it to work.

    REW Forum
    For some reason, I can't get input to REW. I have a ART DualPre feeding USB. I can see it in the set-up and I can get the Pink Noise and such on the output, but no level display or RTA input. I can see input level on System Prefs/Sound/Input/ bar meter. I'm sure it's something simple, but I'm...
  6. Can't get Bass below 30hz (Suggestions please)

    Subwoofer Amps | High Pass Filters
    Hi All, I have just built a ported sub woofer & can't seem to get any frequency below 30 hz. The sub woofer driver is a Mach audio IXL 18. The cabinet was designed with the help of gperkins_1973 & is tuned to 15hz. There is a build thread (I tried to insert the link but became to long) The...
  7. Can't enable SuperWhite on 8350 w/PS3 via Component

    Home Theater Projectors
    I was curious if anyone using a PS3 via component with the Epson 8350 is able to turn on the SuperWhite setting. Thanks John
  8. New member; can't get WinISD to work??

    DIY Subwoofers - General Discussion
    1st; Hello everyone! Been reading your forum posts for quite a while but never posted until now. I downloaded & installed both versions of WinISD on my PC using Windows 7 Home Premium 64-bit. WinISD seems OK but I can't get WinISD PRO to work properly. The driver data I'm inputting is for Mach 5...
  9. Can't Get Digital Audio from Apple TV

    System Setup and Connection
    Hi, I've got a Samsung HDTV LN-T5265F, a Comcast DCT6412 III cable box, a Samsung HT-Z510 Home Theater and a new Apple TV. Just got the Apple TV. Everything works but don't see how to get digital audio from the ATV out of the HT. The ATV connects to the TV via HDMI, the Cable box connects to...
  10. It's so Loud that I can't See

    New Member Introductions
    Hi Ya'll I work at the Von Braun Center in Huntsville Alabama which includes a 10000 seat Arena and a 2000 seat Theater I also have a 3000 watt sound system and 60 PAR38 lights that I rent out regularly I do it all including: Sound, Lighting, Video, Power, Computers, Photography, Carpentry and...
  11. Can't open .mdat graph files

    REW Forum
    I save my graphs, which are .mdat files. My windows 7 computer can't open them for viewing. Shouldn't they be jpeg files. What am I missing? Peter
  12. I assume I can't use this one

    SPL Meters | Mic's | Calibration | Sound Cards
    Hi, just starting to work with REW, hopefully not too stupid question, just wanna be sure? Enclosed you find the result from the soundcart calibration measurement from my build-in soundcard, Asuume with the drop-off @ 33 Hz can't use it for full range measurement? Txs
  13. Can't find an Edirol UM-1EX - could I use this??

    REW Forum
    Hi, Searching high and low for an Edirol UM-1EX, but really having no luck, so wondering about alternatives. Would anyone know if I could get away with this...
  14. Can't see the graph

    REW Forum
    I've used REW for a litte while and it has worked fine all the time. I take impulse measurements with another program and upload it into REW. Suddenly I'm not able to see the graph any more. I dont' understand why. I've tried to uninstall REW and install again in case it was the settings, but it...
  15. Can't download

    REW Forum
    Hi all. This is my first proper post on this forum. I am interested in building myself a subwoofer or two in the near future but as I don't really have the first clue as to how to go about this. I am now trying to learn all I can before I start. Some of the lads over on Avforums linked me...
  16. Can't get REW to work....any suggestions??

    REW Forum
    Hi all. Having ordered an external soundcard with a line in so that i can use it with my laptop, i have tried to get REW up and running to see how my new sub is responding in my room. I just can't seem to get REW to work. I'm using a RS spl meter (with calibration file loaded) Denon 1610 avr DIY...
  17. Can't calibrate Turtle Beach Riviera Wave

    REW Forum
    I recently added a new soundcard, Turtle Beach Riviera Wave, to my Windows XP PC, in order to have digital out capability to my processor. I have cruised the forums and have seen this type of chatter problem before and answer was to look for monitoring box checked creating feedback. I have...
  18. Any reason whyI can't use an EPX amp?

    Subwoofer Amps | High Pass Filters
    Hey guys, I know how popular the Behringer EP series amps are, but has anyone tried or looked at the new EPX series? I'm looking to use the EPX3000: http://www.parts-express.com/pe/showdetl.cfm?Partnumber=248-6482 It has plenty of power for my application, but the thing that turned me on...
  19. Help please. Can't get a signal out from REW to RME Fireface 800

    REW Forum
    I am running a RME Fireface 800 "firewire" interface to my Windows Vista 64 machine. For some reason no matter how I try to configure REW I cannot get a test signal out of it. I have tried all the default settings for Speaker, Sound Driver, Default, etc. but when the I try a check levels there...
  20. I can't figure this out!!

    REW Forum
    OK, so I know from reading the forums that the Radio Shack meters are not the best for calibration but I'm more or less using this program to try and plot sub woofer response. My question is about calibrating the dB level. When I attach my meter to the computer and set it to the 80 dB range the...
Top