Home Theater Forum and Systems banner

changed

  1. Pioneer VSX-325 Input Suddenly Changed to C1 from H

    Pioneer
    My Pioneer receiver has been working for the last year. Suddenly the TV input is displaying C1 or 01 instead of H. I reset the receiver and the Samsung smart TV. I made sure that the optic audio cable was properly installed on TV and receiver, and that it wasn't bumped out. There is no "signal...
  2. Measurments changed.

    REW Forum
    I took some measurements after I thought I was good and dialed in and after I ran Audyssey, my response was very good. That was a month ago. I have made no changes, so I ran again today and now I have dip at around 80hz. What could be happening. Btw, I have 2 PA-120s and a FullMarty Sub with...
  3. Export measurement as text: frequency resolution changed in beta?

    REW Forum
    I have a .mdat file that was created in the 5.0 production version from a measurement done back in 2012. At that time, I exported it as text and still have the saved files. The measurement was from 40 Hz to 200 Hz. Smoothing is off. The file header looks like this: * Format: 256k Log...
  4. Changing # of sweeps radically changes my FR and IR changed with new mic

    REW Forum
    I noticed that when I go to measure, the more sweeps I have REW run the crazier my FR curve gets. I was under the impression that running more sweeps basically just gives you an average of the readings so that if there is some kind of noise during one of the sweeps it won't affect the final...
  5. hitachi p50t01u tv changed capacitors now blank screen

    DIY Repair and Maintenance
    i have an hitachi p50t01u tv which had the capacitor bulging problem but since i have replaced them and refitted the board i now get a very dim lit screen but nothing on it also i cannot adjust anything at all? can anyone help me please
  6. can gold be changed to yellow on crt rptv?

    HDTV | Video Displays | Processors
    tv: PIONEER SD-533HD5, 53" CRT RPTV HDTV. All colors look very accurate except for yellow, it is gold. The only way I can get a decent yellow color is to turn the color adjustment way down which makes all other colors too dull. At least it is an accurate gold color, not greenish or redish. It...
  7. Changed set-up....o.k. to plug plasma straight into socket?

    System Setup and Connection
    I am moving all my gear to a rack in a closet for a clean look. So I will be moving the power line conditioner I have used for over the past two years. *Can/should I plug my 1150HD straight into a wall socket?
  8. Curious have you changed reciever just for HDMI?

    Home Theater Receivers | Processors | Amps
    I was debating it for a while but decided not to change my reciever just for the HDMI capabilities for fear that i dont think i would of been upgrading.So i'm asking here who has done so and was it worth it.I personally did not want to spend a good amount just for HDMI and then realize that the...
  9. Changing receivers changed my sub phase - normal?

    REW Forum
    I used REW and BFD a month ago to set up my Yamaha RX-V1400 and HSU sub woofer just beautifully. I just got the Yamaha HTR-6090 which is very much like the 1400 except its more modern (the 1400 is a couple years old), has better processing and HDMI switching. I used Straight for the 1400 and...
Top