Home Theater Forum and Systems banner

compatible

  1. SPL Meters | Mic's | Calibration | Sound Cards
    My interface is not stable in multi-channel mode using ASIO4ALL with REW. I'm able to direct test tones to each channel individually and in combination, albeit with much switching noise in the process. At its best, the ASIO4ALL driver gets reset, forcing an REW restart or laptop reboot. At...
  2. Home Theater System Recommendations
    hi i have the monitor audio asb2 soundbar and bk monolith subwoofer my question is i am after buying the emotiva erc-3 cd player but would it work with the sounbar if so would it be a great match? nd what would be the best way to connect it? thanks
  3. Home Theater Projectors
    Hello, I'm planning to buy a projector, and by reading the sticky, it's probably true to ask questions before buying the projector.:T I put my basement room layout on attachment since I don't have a place yet to share picture. Is it okay to install the screen on the East side in front of the...
  4. Home Audio Speakers
    I m planning to buy a Klipsch Rf 7 series speaker package from US but I m worried if I ll be able to use them in India as in America it works on 120 volt I guess but in india it works on 230 v. Will there be any compatible issues?? Pls help... Thanks. Aju
  5. REW Forum
    Hello, I'm new to REW and I'm trying to see if Equalizer APO can help me configure my setup, so that all the channels would sound more "lively", instead of plain flat. The problem is, that I'm currently unable to try and optimize my Equalizer APO settings by using REW, since my computer is in...
  6. SPL Meters | Mic's | Calibration | Sound Cards
    I joined primarily so I could download Room EQ Wizard. Before I do, I need to know if I NEED new equipment to run it, or if what I have is likely to work at least to get me started. I should note, I have no signal processing in my home setup. I'm largely a stereo guy, though I do run my HDTV...
  7. HDTV | Video Displays | Processors
    So, I just a bought the "New for 2013" LG 60" PN5300 plasma tv...I hooked it up to my Fios cable box and now I cant change the channels!!..As soon as unhook the tv, my box works fine again??..If I hold the Fios remote directly on to the front of the cable box it will change the channels, but as...
  8. Remotes | Cables | Accessories | Tweaks
    One of the challenges I had and some of you have been privy to indulge your patience with; is the fact that I have NO 'Line of Sight' in my audio/theater room rendering IR remotes absolutely useless (regardless of how pretty they look!). I knew I would have to face this problem head on and as my...
  9. Home Theater, Audio and Video News
    The Quick6 4K UltraHD HDMI switcher by DVDO, first introduced at the Cedia Expo in September 2012 in Indianapolis, has been announced. It provides 6 HDMI inputs and 2 outputs that are high-speed and 1080p, 3D, and 4K compatible. The 2 HDMI outputs can send video signals to 2 different screens...
  10. Home Theater Receivers | Processors | Amps
    As the captioned question, are they a good combination? I have already decided to purchase the MT-50 speaker package, but still can't decide the receiver. (I'm of 60 movie and 20/20 for music/TV.) To be honest I do like all of the specs of 2113 on paper. But what I'm worrying about is that...
  11. REW Forum
    Is REW fully compatible with Windows 8? :scratch: Any issues? Thanks! ...Glenn :D
  12. System Setup and Connection
    hi guys i have about a zillion cable outlets in my house one for every room and some times 2 in a room. i ran the wires when i built the house. i am at the point where i need a real amplified signal splitter but it has to be compatible with the comcast digital signal i am forced to use. i...
  13. REW Forum
    Want to start using REW. Can anyone suggest a good external usb sound card compatible with windows7?
  14. Home Theater System Recommendations
    I have a Denon receiver 1911. It is a 7.1 receiver. My speakers are, Boston Acoustics CS2310 (5.1) and Infinity reference 2000.4 pairs as front speakers. Now I want to replace my Infinity pairs with JBL L890. As per Benon manual front speaker is 90W+90W (8 Ohm, 20 Hz-20 KHz with 0.08% T.H.D) and...
  15. Home Audio Subwoofers
    Hi, I've read many posts on this forum and information I found here is awesome - so I decided to join. Following many suggestions I decided to start with Onkyo 609 receiver and 2 Polk Audio Monitor 50 speakers + Polk Audio CS3. Now it is time to buy subwoofer. I'm moving quite a lot, mostly...
  16. Video Calibration
    Guys, I'm considering a change of plan. Instead of getting Calman and Colormunki, I'm going to try to get my grubby little hands on an i1 Pro and simply use the free HCFR software (for a while). I'm not intimidated by spooky technical things. lol I simply feel that acquiring the best...
  17. Toshiba
    Ok i have a toshiba 46hm95 with a blown lamp. I have the oportunity to get a toshiba 52hm95lp with a bad ballast. are the two of these compatable with each other?
  18. Video Game Systems | Video Games
    NGP To Be Backwards Compatible 01/27/2011 Written by Sebastian Moss With all the amazing news coming in about the “Next Generation Portable” at the PlayStation Meeting 2011, you’d be forgiven for forgetting the original PSP even existed. Luckily, you’ll remember as soon as...
  19. Testing
    Last week ESPN 3D launched, and Comcast's information indicated many users with older cable boxes wouldn't be able to get on the action without an upgrade. The good news for TiVo owners is that information has since been updated and now TiVo Series 3 / HD and TiVo Premiere units are on the...
  20. Samsung
    I currently have an HLR6167WX/XAA and the only problems I have with it is an analog board with broken solder contacts and a scuffed lens on the light engine assembly. Looking up the parts for it, (haven't cracked open the back of the TV yet to verify) I found that the part # for the analog...
Top