Search Results for ‘configuration’

Hi guys, I would appreciate if someone could chime in if equipment used to measure my studio monitors in my room would work? This is how my monitors are currently connected: Desktop PC via USB -> Behringer UMC204HD (that can do phantom power) -> 1/4" out to XLR -> Focal Alpha Studio Monitors I...

Hi guys, I've written a blog article about YPAO and YPAO R.S.C. if you're interested. There isn't a lot of information on the internet or forums about it and some of it is pretty misguided. Please read it, share it and comment if you like. I hope it will add value to those who are considering...

I spent some time today taking some REW measurements of my DVC sub in different configurations, and am intrigued by the results. I'm using a Carver a-400x amplifier which is rated at 200wpc @ 8-ohms, 300wpc @ 4-ohms, or 500w bridged with an 8-Ohm load. The sub is a DIY sonotube sub with a DVC...

Hello all, I'm in my initial stages of creating a home theater in a small narrow room. This is my only option so there is no room to increase the size. I intend to have a 70-80 foot screen one foot from one of the walls. I am wondering how much seating I can insert without it being...

need some help in deciding on seating configuration theater room is 20' 9"long and 13'7 wide. have a 6 foot 12 inch high riser at the back. would like 4 seats in the front row if possible thanks

Hey all .. So yeah, I have created two previous threads, but its so confusing, I'm creating a third one, since I've also found some issues with projector screen size limitations .. Hopefully this will be my last thread on this topic :D Room Specs: So I have two possible projector throw...

Hi, 90% of my music now is coming from the computer, most is 192Kb/s or lossless, I was wondering if I can build a nice setup based on the computer as a source.. Here is what i have in mind: 1. Source – computer optical output, no card, coming directly from the MB which supports this. 2...

Hey there, I have a pair of Boston Acoustics CS23 II bookshelf speakers, and a pair of Polk Audio RTi A3's (I'd link if I could!). The former I can't find a listed wattage for, and the latter is listed at 20-150W. The required arrangement is that I be able to turn one or both sets on at a...

Hi Everybody I am a new member joined in today and first of all would like to thank all of the AV Electronics guru for such valuable recommendations and knowledge sharing. I would like to mention that this is pretty much my first time deciding to own a good HTS. So here I am confused and...

Hello everyone!!!!, i'm from Argentina and I start this post to show you my actual setup to do some measurement (principally impulses responses). The idea is that you can share me your opinion, what is fine, what not...etc. in the image you can see the setup. The idea is that this gear give me...

Hello: I am wanting to put surround sound in my family room. I have it in my media room. However I have 4 speaker outlets. Two on the front wall and two in the ceiling. I thought you needed at least 5 speakers for todays systems. Is there such a thing as a 4.1 configuration that is any good...

I am working in an environment where I need to change the REW RTA display / color configuration. I cannot see how to do that,..IE change the background color, change the graph / bar color(s). Can someone point me to a way to do that,..?? Many thanks,...

Greetings, long time reader, first time poster... :nerd: I have a Denon 3312, and trying to setup my speakers to it. Well, I have them all setup, but now just trying to tweak the Denon to get the best sound out of it. Does anyone know what the best crossover settings are for my speakers and...

After reading my original post and the lack of response it is very apparent that my questions were a very ambiguous. :doh: I am a little new to forums and really new to home theater. Here is my second attempt. I am concerned about the acoustics of the room, being a mini-cathedral room with a...

I know I have seen some threads where people have used some sort of rack configuration tools/templates for designing their rack/configuration and equipment locations but for the life of me search has not been my friend today. Can anyone point me to the right location of these tools or templates...

I recently purchased the Onkyo TX-SR608 AV Receiver and for the moment using my old Sony satellites speakers and subwoffer which are still in good condition, which I got with the purchase of 'Home Theater in a box' 11 years ago. AV Receiver - ONKYO TX-SR608 Speakers - Sony satellites SS-V150...

NAD C372 Intergrated amp Grace m902 Headphone, DAC & Preamp NAD C542 CDP Epos M12.2 Speakers M&K MX70B Subwoofer Sony Bravia XB4 42" LCD

I'm assisting my father in upgrading his entertainment setup - so with that said, the room where his existing stuff is setup is a really difficult configuration. Here are the known: He wants: in-wall speakers - or atleast speakers that aren't laying around for his dogs to knock over. (he has a...

I've had my Sony STRDG720 for the better part of a year now, and have just run into a small complication. My speaker setup is a simple 2.1, and all the modes I've used up until now (Video 1, Video 2, CD, etc.) are set to 2 Ch. audio. However, I just bought a PS3 and hooked it up with HDMI...