Home Theater Forum and Systems banner


  1. How to connect audio o/p of Panasonic viera th-32a403dx to Sony DAV DZ 640k home theatre

    System Setup and Connection
    Hello Folks I have a Panasonic Viera Th32a403dx which is having only co axial digital audio output and Sony DAV DZ640k having HDMI ARC as only audio input. I wanted my tv audio connected to the home theatre. Can anyone out there sort this out..
  2. Can't connect several onkyo components.

    System Setup and Connection
    Hi all...I have been through Internet 2 days now but I just cannot find the solution for my problem. I have (all are Onkyo) some components that somehow I can't get it go work properly. I have the onkyo tx-sr608,the cd dx-7511,the minidisc md-2321 and the double cassettedeck ta-rw244. The...
  3. How to connect a diy audio signal to my “expensive” audio interface

    DIY Audio
    I'm a hobbyist and after some experimentation (around 4 years) I want to connect my signals I create on the breadboard to my expensive audio interface. Until now I was using the "mic" input on my laptop to connect the signals and I haven't damaged it. I'm using a 40k resistor in series with each...
  4. Bad idea to connect both sub pre-out and front speaker out to subwoofer?

    System Setup and Connection
    Until now i have been using only 2 speakers and a sub, that was set up using the subwoofer crossover (reviever -> sub -> frontspeakers), but i just got some new speakers that i want to use in a surround, so that i can get the full experience when watching movies with 5.1 tracks. I thought it...
  5. LightSpace Connect - Android & iOS App

    Video Calibration
    LightSpace Connect enables LightSpace CMS to be used to measure and profile mobile phone screens, tablets, and connected TVs, monitors and displays, enabling users and manufacturers alike to verify screen capabilities. Using Screen Mirroring any variations between a TV's HDMI inputs and direct...
  6. NanoAvr-DL and REW how to connect

    Audio Processing
    Hello, I want to measure the FR response equed by Dirac Live with REW in order to check the difference between the Dirac live measurements with sound system set to 5.1 and custom sound system because I am not sure what the receiver does with the sub channel calibrated or not by Dirac Live. When...
  7. best way to connect the emotiva erc3

    System Setup and Connection
    hi i am about to buy the emotiva erc3 at the moment i have a roger sound labs cg24 5.2 speaker package with an additional 2 cg4s connected to a denon 6200w amp and the front and centre speakers are connected to emotiva xpa3 amp using blue jeans cables my question is what is the best way of...
  8. How to connect single set of speakers to 2 audio sources

    System Setup and Connection
    Hi friends As I mentioned in Equipment section, I owned Odessey 5.1 Home theater system and a Creative SB Live 5.1 soundcard. I have two computer systems one is Lenove desktop, Pentium-D processor,1 GB RAM, 80 GB HDD,SB live Audio card running Windows XP SP3 another is assembled machine -...
  9. how to connect my system

    System Setup and Connection
    Hi everyone I am very new to this field. i've download REW for my university project. but i have no idea how to use it. The project is a topic on digital stethoscope and my supervisor had suggest me analysis the heart sound signal before it going into a microprocessor.( as i am using electret...
  10. how to could i connect these tweeters?

    System Setup and Connection
    This might be crazy but here it goes. I have a 1000w samsung home theater system. The front left and right channels deliver 167 RMX each. Could I connect one of these tweeters to each channel wired in series. Would it damage either the home theater or the tweeter? Here is the link of the...
  11. should I connect these sub in parallel or in series?

    System Setup and Connection
    Hi, I have a bluray samsung home theater system which I would like to connect two sub in parallel. The home theater sub out is rated at 3ohm 175 RMS. The subwoofers I want to connect are 6ohm and 135RMS. Could I connect them in parallel in order to drop the inpendance to 3ohm? Or connect them...
  12. how can i connect a powered subwoofer?

    Subwoofer Amps | High Pass Filters
    Hey, what's up. I have a bluray samsung home theater system with no subwoofer pre out. I want to use a powered subwoofer, however, it seems that the only way to connect it to the home theater is through the subwoofer out which is 170 RMX. So I was wondering if I can use this line converter in...
  13. Connect passive sub to 2.0 receiver using plate amp

    System Setup and Connection
    Hi, I'm looking at building a DIY sub (lilwrecker) and not sure if I would take a plate amp (quite expensive and not a good option as I will need to build an external box for it anyway) or a PA amp (Behringer EP4000 or Crown XLS) I only don't really see how to connect the PA amp to my receiver...
  14. Connect all HDMI to TV and optical to Receiver?

    Remotes | Cables | Accessories | Tweaks
    The technical service of my cable company gave me the following suggestion. I am suspicious because I am not an expert. To get better sound in my 5.1 HT, he suggested to connect hdmi output from the DVD-player to hdmi input to the TV and to connect the hdmi out from the set-top box (cable...
  15. Connect Sony STR-DN1050 to EP2500 for mains

    Home Theater Receivers | Processors | Amps
    Title states it all. I'm trying to hook up my DN1050 to a spare EP2500 for my L and R mains. To my knowledge and from the research I've done, the DN1050 does not have any outputs for external amps, other than for the LFE. When I bought the DN1050, I didn't plan on using external amps...
  16. It is ok to connect this sub?

    Home Theater System Recommendations
    Hi, how are you? I have an RCA RT2911 1000-Watt home theater system. The sub channel is 210 RMX at 3Ohms. The subwoofer I would like connect to this system is an 8ohms subwoofer, but doesn't says the exact RMX. It only says Max power = 400 watts and Peak power = 800 watts. Can I run this...
  17. Connect a sub to receiver?

    Home Audio Subwoofers
    Hi i'm sorry if this is a stupid question but can i hook up my sub to the receiver with a regular rca cable? Or do i need a special cable?
  18. Can I connect a

    System Setup and Connection
    Hello all, Can I connect an JVC RX-718V to my Onkyo AVR (model TX-NR838)? Found the JVC a friend gave me for helping them move that I completely forgot about. Been using it in the garage to test it out and on some new drivers I got and it has a decent amount of power. It says 'Stereo Receiver'...
  19. How to connect CABLE TV SET TOP BOX to LCD MONITOR?

    Remotes | Cables | Accessories | Tweaks
    How to connect CABLE TV SET TOP BOX to LCD MONITOR? My local cable tv operator has supplied a set top box and it is having 'Composite Video Output' This is the item specifications DVB-S MPEG-2 SD Compliant Composite Video Output: CVBS RF Modulator CH3/CH4 or CH21~CH69 (Optional) Stereo Audio...
  20. how can I connect this subwoofer?

    Home Audio Subwoofers
    Hi, how are you? This is stupid what I would like to do. I have a 340 RMX subwoofer. I want to hook it up with my 5.1 samsung HT-D5300 which only has one subwoofer (170RMX) output. Should I get one of the surround output which is also 170RMX and connect it to one of the sub input. And the...