Pls Guide: 4K Display TV: Size, Mount, Ideas - Tilted Angled Down, Corner, Flush to wall Please advise on 4K Display TV - Size + Mount & mounting ideas - Tilted Angled Down, Corner, Flush to wall Suggestions on TV size & Mounts/ ideas on designing & implementing this correctly. Will mostly...

Hi all, I’m thinking to a room treatment in a new chamber where I will soon move my two channel audio system. I would like to build an absorber for low frequency in a corner, just to hear (and measure) the difference before and after, and evaluate if continue on this way. I’m looking at...

Hello everybody. I found this site linked from another site and it looks like a great place to do some reading. I plan on doing some searching and reading but thought I would post this to get some new and more recent help. I plan on tackling DIY floor to ceiling corner bass traps and have...

I was thinking about taking a 6" thick 2x4 foot panel and instead of two to straddle a corner using 4 of them and placing them so they go the long way across the corner to space them farther away from the wall adding to how much they can absorb. Would this help sense I only have 2 corners in...

Hi, I've got back to doing some more treatment to my listening room and am trialling some DIY corner bass traps. The dimensions are 300cm x 300cm x 415cm and 1000cm high giving them a volume of 0.045 cubic meters or imperial 1ft x 1ft x 1.5ft approx. and 3ft high with a volume of 1.5 cubic feet...

I tried my hand at some corner traps, white fluffy actually. I am curious, how tight do you stuff them. I tried to leave them in a natural state of R19. Should they be compressed a bit? Here are a couple of photos. The first, adding the insulation and shelving to to keep the insulation from...

My house has one of those old, corner built-ins..it houses some gas equipment, so I cant get rid of it completely..I tore out the top shelves and installed some theater curtains and a LED light bar..I still have some finishing work and paint on the built it,and iron some of the wrinkles on the...

Hi need some advice about my plans to improve my room, I'm currently redecorating and with the limitations of my room I'm planning on puting one floor to ceiling bass trap 35cm by 35cm on the left front corner of the room so that visually it is symmetrical with the chimney stack that sicks out...

Hi Everyone, been away for a while, I am now back home and its time to continue HT room treatment. The triangle corner absorbers, what is the recommended size and thickness, this is for the back corners of the room, top and bottom. Peter

I have a decent amount of Ruxol remaining from my basement renovation and wanted to use it for bass traps. My room does have noticeable nulls so I figure adding traps can't hurt? The only space I have available is in the rear corners next to the back row seating. I have a space that is 9"wide x...

Yes another thread asking for advice!! Thank you for your time hehe... btw I'm french, so sorry if I'm not using the right words... So, I got some 34" wide "office screens" to put in front of my corner traps (piling up mineral wool). I'm hesitating on 2 matters: 1- A:Making 34x24x24 triangles...

Hi everybody, I was doing some reconfiguring of m,y theater room and after removing the audio credenza that I had all my AV gear on or in. It sure made the front of my room much cleaner looking. I decided to try placing my SVS PB13u in the centre under my screen (it was in the right corner) and...

I have a dedicated listening room in my home measuring approximately 7m L x 5m W x 2.8m H. The room has a carpeted concrete floor, painted brick and plaster walls and a gypsum ceiling. When I initially set up my hi-fi in the room the acoustic response was terrible - the room was loud, boomy...

First, I'd just like to express my guilt for jumping right in to asking for help and asking questions with out really contributing anything. Im a cable tech so if anyone has any questions about running coax, splitter configurations, amplifiers or anything related to dealing with a cable company...

Company that sells it is local to me, and I like the fact that it comes in 4", which means less cutting for me. The chart attached is for the 2" version but the 4" has the same density. Looking at the published absorption values it looks similar to the OC703/705, but I dont know if they same...

Build thread for a corner sub using an old NHT 1259 I had laying around. Corner is the only place for the sub in the room and I have the 1259 and a sheet of MDF. More to follow.

Hi everyone, Have been reading and learning so I assume not a lot of you will know me but here is my first attempt on building a sub... Finally coming to a point in the renovation of the house, that I can work on the corner with the gas, electricity and water meters. This corner will...

Hi all, I've got a home theater contruction build going here and I had specific question on acoustics. The room is 34'x15.9'x7.4' I'd like to create 4 superchunk bass traps for each corner. The question is this: What's the best location for the subs? Is it best to build a shelf and put the...

Greetings, can I make this install better, as-is, Im really stuck and can not move the bracket! The Martin Logan LX16s, Ive been lusting over these beauties since the moment I first saw them. I am finally expecting my first pair and theyll be used in a 2.0 configuration for now. Im worried...

I'm planning to build corner bass trap panels, based on what I've been reading, measuring 24" across, using 5" of roxul rht40. They will go floor to ceiling, and I want to do panels because I'm not quite willing to commit to a more permanent built in trap filled with loose batt material...