Home Theater Forum and Systems banner
create
1-15 of 27 Results
  1. REW Forum
    Hello Reading through the miniDSP 4x10 HD manual and several of the articles they have, there are references to the plug-ins that show how to create Basic and Advanced cross-overs - advanced using biquads. This seems to be one of the primary uses of REW for miniDSP but I am at a loss as to how...
  2. REW Forum
    I am making gated measurements of individual drivers mounted in the loudspeaker enclosure at a distance of 1 meter. I am using a UMIK-1 with its calibration file and also a seperate tweeter as an acoustic timing reference. My goal is to export SPL and MINIMUM PHASE measurements of individual...
  3. REW Forum
    Hi, I have done my first measurement and here is my result..It is with Audyssey ON but with DEQ OFF at 85dB- I would like to generate EQ filter for my mDSP2x4 to try first so i dont want to run a Audyssey calibration again. I have attached my mdat. file here could anyone please create a EQ...
  4. REW Forum
    Hi! I am currently approximating the 7 band manual P-EQ of my Yamaha RX-A2050 by "eye" and lots of try and error. Would it be possible to create some custom Equalizer setting for REW like miniDSP, nanoAVR, etc so it knows the restrictions and enables the use of automatic response matching...
  5. REW Forum
    I'm trying to find a way to use the EQ tool in REW to get applicable settings for my CP-800. I generally use the "Generic" equalizer, and limit the number of PEQ's to 5, but I cannot find away to limit the Freq, Gain & Q. More often than not the Q will be far larger than what is allowed by...
  6. Home Theater, Audio and Video News
    Exclusive Agreement Creates "Nielsen Twitter TV Rating," the Definitive Reach Metric for Social TV Audience Measurement and Analytics NEW YORK and SAN FRANCISCO, December 17, 2012 – Nielsen, a leading global provider of information and insights into what consumers watch and buy, and Twitter...
  7. REW Forum
    Can REW be used to create a frequency response for a theoretical room? It seems like it would be able to as it has the ability to add modal peaks one by one to create an overall frequency response. I guess it would only be useful in the design stage - when you can actually set the room...
  8. System Setup and Connection
    between my 80Hz-bottomed surrounds and my sub? Because, otherwise, 60Hz is perfect for my mains/center. thanks!
  9. REW Forum
    Is there a certain way to make a .cal file? I just sent my ECM8000 mic to Cross-Spectrum Labs to be calibrated and I don't know if they will supply me with a .cal file or do I have to create one myself? Any help would be great.
  10. Home Theater Receivers | Processors | Amps
    Unlike the MacIntosh version (MEN-220) of the Lyngdorf RP-1 (or the preamp version DPA-1), the voicing software does not let you create new voicings. However, after taking a look at the McIntosh software, and the file structure of the Lyngdorf voicing files, after a lot of effort I created an...
  11. Computers | HTPC | Media Servers
    So this example is a network address that my AVR allows editing and selecting Streaming radio sites. Many other network devices could be accessed this way such as your Router settings page or Web based functions like 181FM Player I also use on my desktop. Sadly Mozilla has stopped development...
  12. Electronic Processing/Equalization Devices
    Trying to get the BFD to create a LPF but not succeeding. I've used 4 filters but can't seem to kill anything over 100Hz fully. I can still hear upto 1KHz and maybe higher. Anyone done this successfully? If so... what settings did they use. I'm trying for a 80Hz crossover effectively without...
  13. Home Audio Speakers
    I was experimenting last night with my MTM towers after reading a post on partsexpress techtalk. The post was talking about omni directional listening and the effects of the 3d image received from said setup. So, i got to thinking and added a set of soft dome tweeters to the back side of my...
  14. SPL Meters | Mic's | Calibration | Sound Cards
    I have a digital Radioshack SPL meter and a calibrated ECM8000. Is it possible to create a calibration file for the Radioshack using the calibrated ECM8000?
  15. Electronic Processing/Equalization Devices
    Hi Guys, Ive had a bit of a play around with the software and got a bit of a feel for it, but wanted to ask those that actually used the device before if its a good thing to use to create an LT? Also if you wouldn't mind could you add a run down on what you did.. Cheers.
1-15 of 27 Results
Top