Home Theater Forum and Systems banner
criteria
1-6 of 6 Results
  1. Home Audio Subwoofers
    I'm my thinking about replacing my Subwoofer. I had a 30 ft. by 20 ft. listening room. I'm relocating and probably will be down sizing to 17 ft. x 14 ft. I need between 5 and 10 subwoofer matching ideas. Equipment below. Front Speakers B&W 683 Sensitivity 90dB Crossover 350 Hz - 4kHz Woofer...
  2. REW Forum
    I'd like to measure noise criterion, and I'd prefer to use REW to do so if it's possible. There have been two threads on The Shack about measuring background noise, This one in Jan 2008 and this one in Oct 2008. It was indicated the best tool was the RTA display, except that I know how to...
  3. DIY Subwoofers - General Discussion
    Current setup....room is open to about 2500sqft of floor plan on two levels. Big volume to fill. System is currently 3 Adam Audio S3X-H's across the front, and two S3X-V's on the walls. Eventually 4 more S3X-V's will be added; two to the rear wall and two either front high or front wide (side...
  4. Home Audio Acoustics
    well ok..i have seen some graphich..and we all try to get it as flat as possible, by EQ or acoustic treatment..but what other thing that comes into the criteria of a good control room..a wide image..reverberation time..im lost....spare some light??:doh:
  5. Pro Audio
    well ok..i have seen some graphich..and we all try to get it as flat as possible, by EQ or acoustic treatment..but what other thing that comes into the criteria of a good control room..a wide image..reverberation time..im lost....spare some light??:doh:
  6. REW Forum
    Is there a way to measure the noise criteria(NC15,NC20,NC25 etc.) of a room with the waterfall plots by looking at the 1/3 octave bands (63,125,250,500,1000,2000,4000,8000HZ) or do I have to take a seperate SPL reading for each band and then look at the published charts to see where my noise...
1-6 of 6 Results
Top