I have been throwing around the idea of a DIY sub. I chose a fairly midrange sub and amp combo and a really nice guy at parts express helped me design the box. All nearly 10 cu ft of it! :gulp: Is this because of my particular speaker choice. If it helps any, it is a Dayton RSS390HF-4. I would...

Hey guys, any WinISD pros that can model a good budget(under $200) 12" driver for a 2 cu. ft. sealed enclosure? I have tried WinISD with the Dayton UM12 but I don't feel confident my numbers are coming out accurate. Was thinking of powering it with an Inuke1000 dsp. Goal is to exceed the...

I have the chance to pick on of these for 800. Are they good for music?

I have just received a QSC 3602 amp that I am going to pair with a couple of 3.5 cu ft boxes that I am building. What drivers would work well in this box now that I have some decent power to drive them (1100 watts at 4 ohms). The reason the box size is fixed is that I am adding these to two...

So :neener:, so I have a huge space and need a new subwoofer. Apparently 2 Rythmic RV12R would do the trick but that's $1100 open box and they are pretty big. I'm afraid WAF is going to be an issue here. :dontknow: Given the WAF & cost, does anyone have any magical solutions for this large...

I'd like a small pair of subs for HT and was wondering how sealed cubes based on the LMS-R would stack up against some of the nicer commercial subs I'm considering. Obviously price is better for DIY (assuming its DIY and not 'DDDDDDDDIY'), but I'm more interested in performance available in a...

I pulled the trigger and ordered my parts for my new subwoofer. I am building this box (http://www.hometheatershack.com/forums/diy-subwoofers-general-discussion/62786-new-build-help-15-a.html#post559416) after some recommendations from others, and it fits my needs nearly exactly as the OP of...

After what feels quite a long time and mulling over various options and having finally sold my dali subs I have decided to go down the route of getting two Ascendant Audio Havoc 18" drivers from my UK distributor Blade Ice where I purchased my previous Q18's from. He has kindly quoted me £620...

Hey Folks, A new living room config and general lifestyle requirements have led me to build a super small sub (pair). My 7 cu. ft. sub and large towers don't fit in the new arrangement. I'm building this pair of subs as "bass bins" and to serve as stands for my Klipsch RB-15 bookshelf speakers...

I am a finishing a theater and have a space under the stairs that measures out to approx 90 cu ft. Would that be enough room for a small infinite Baffle setup using 12s. Or would I be better off using the space for a ported enclosure.

Hello After months of reading on this forum and weeks of working with Graham Perkins (another Graham Perkins design) I have started to build 4 IXL 18.2.2 10 cubic foot subs tuned down to 15hz. I have all the parts with the exception of the 2 Berhinger EP4000's. These subs are to replace one 12...

Universal Electronics Announces NevoQ50 - Superior A/V System Control in a Simple, Customizable Touch Screen Interface September 05, 2007 Universal Control...

Final design not completed yet, but I will go for 2 boxes 550-600 L effective, 16 Hz tune, 8" or 10" port, powered by EP 2500, dual 2 ohm configuration. I am not that good in woodworking, so I am only making the design on paper, but will have the job performed by a carpenter. I have some...