Home Theater Forum and Systems banner


  1. Budget friendly driver for 500mm cube

    Ported Subwoofer Build Projects
    Hey guys, so budget is a limiting factory for my build its a 500mm cube I don't mind ported or sealed but need sub 30hz(my mains comfortably get to about 35 before they roll off too steep) I am in the UK so somthing available here would help as I would have to spend on shipping & import duties...
  2. Cube Cubed - a Passive Radiator Subwoofer Build

    Ported Subwoofer Build Projects
    I have always loved passive radiators, so I thought I would finally do a build log along with all the parts needed. Thanks to Parts Express, I am able to bring one of these Passive Radiator Builds to life. My goal was to make a small subwoofer that would still have high spl, for a smaller room...
  3. 22" cube or small ported

    DIY Subwoofers - General Discussion
    Hey everyone, trying to decide if there's a good reason to do 2 small ported subs over 22" sealed cubes for SI HT18s. They will be powered by a inuke 6000 with a minidsp. I can do 22" sealed cubes or something up to max dimensions of 22"H x 32"W x 24" D for a ported or sealed build. The room...
  4. Marty Cube start.

    Ported Subwoofer Build Projects
    After getting severely 'hooked' by this forum..........I am now building two subs. My DIY PE knockdown project is running smoothly in another thread. This thread is for my MartyCube build attempt. I got all the wood cut........now for some glueing and nailgunnin'! I will purchase a standalone...
  5. 8" sealed mini subwoofer build

    Sealed Subwoofer Build Projects
    I need a new project. I would like to build a tiny sealed subwoofer for music (not a spectacular setup, 2x infinity primus p363). I have some 3/4 mdf lying around, and an old Infinity TSS-450 amp (100 Watt, probably tuned to around 35, 4ohm). I don't listen to music too loud, just want...
  6. 2nd Marty Cube SI HT18D4

    Ported Subwoofer Build Projects
    Tomorrow I will start my second MC build. I did not think based on my skill level that it would sound good, boy was I wrong!! I made some mistakes on the first will never use Restore 10X again the finish has way too much sand. Should have sanded it smoother and was getting frustrated on how it...
  7. LightSpace DPS (up to 21-Point Cube 9.261 Colors Free Display Check Version)

    Video Calibration
    Light Illussion's LightSpace DPS (Free Display Check Version of LightSpace CMS) now supports up to 21-Point Cube (9.261 Color Points) Free Display Verification for daily performance test where accurancy is very critical. Verification LightSpace DPS has one main function - to be used for...
  8. Benefits of a 5 cube box filled with safe n' sound?

    Home Audio Acoustics
    I recently built a 5 cubic foot sealed 18" sub, and am nearly finished a second identical subwoofer. The finished sub is in the back right of my room, and I am considering placing the second one in the front left, between my center speaker and the left tower to balance out the sound. For...
  9. Which driver to go with for dual 12 cube 17Hz ported???

    Ported Subwoofer Build Projects
    I am in need of some excellent advice from Mike P and my friends over at the "shack"? I am having a severe case of driver-selection-itis. :help: I have owned some great subs in the past ie. Danley TH50, DTS10, Dual passive Cap Pros on a PL380 QSC, Quad Soundsplinter 15 with (8) 15" AE passive...
  10. Lehmann Black Cube phono

    Two Channel Audio
    Does anyone have any experience with the Lehmann Black Cube?
  11. Quartet 12 kit as tower rather than cube?

    Creative Sound Solutions
    Hello, I'm looking for some input on redoing a CSS Quartet 12 kit: http://www.creativesound.ca/pdf/Quartet12B_Subwoofer_Kit.pdf. Back story. A couple years ago I got the kit from CSS. It includes a Trio 12 driver and 2 APR 12 passive resonators. The kit is meant to go into a 20" cube. It was my...
  12. IXL-18.4 in a cube

    Sealed Subwoofer Build Projects
    Hello. I'm new. Looks like there is a good community here. I've had an IXL-18.4 for a few years but I've never done anything with it. A couple weeks ago I decided to get off my butt and try my hand at building a sealed box for it. I spoke with Mark at IST and he suggested 4 cu ft and...
  13. 30 inch cube titanic mkiii 15

    Ported Subwoofer Build Projects
    hello everyone, new to the forum, amazing place. A week ago i had the idea of buying a new subwoofer, and this week i am in to my first build. I did my research first, and will be using a behringer ep 2500 to power my titanic in a 13 ish foot ported enclosure. I perhaps made my enclosure too...
  14. Existing design for building cube satellite speakers?

    DIY Speakers
    Does anyone know of designs for mini cube speakers? Any info would be appreciated ..
  15. Existing design for building cube satellite speakers?

    Home Theater Design and Construction
    Does anyone know where i can find some designs for cube speakers? Any assistance would be appreciated...
  16. 8.8 cube ft Sonosub Dayton audio RSS390HO-4

    Ported Subwoofer Build Projects
    Hey everybody. Been lurking for a little while now and decided to try a build of my own. I went with an 18"dia sonotube bought from whitecap supply cut to a length that would give me 8.8 cubic ft. Used mdf for the top and bottom cap and for the port I used the parts express 4" flared kit...
  17. 8" passive cube from existing parts

    Sealed Subwoofer Build Projects
    I have a Dayton DVC 8ohm Sub and a free plate amp 10x10 face [email protected] I'm willing to buy and found a Dayton Audio SD215-PR 8" Passive Radiator $15.00 to make a sealed box. I ran the specs on Bass Box and heres what I have so far. How can I optimize the box and or passive to get this looking...
  18. Cube Shaped Subs

    DIY Subwoofers - General Discussion
    Why is everyone building cube subwoofers? Why not proportioned on the golden ratio for a speaker cabinet .62:1:1.62 ? :boxer::boxer:
  19. 20" cube, 3.2 CuFt sealed 15" Dayton Titanic MKIII

    Sealed Subwoofer Build Projects
    I had planned on building 2 cubes containing 15" Titanic MKIII's, but after completing one I am OK for now & will add another down the line if and when I feel the need for more. Considering my upgrade path from 10" Canton sub to 12" TSC sub, this 15 with Behringer EP2500 is a significant step up...
  20. Bracing for 22" cube box

    DIY Subwoofers - General Discussion
    For my upcoming project, I'm going to run one vertical and one horizontal brace. Is it better to have one run left to right and one front to back or can they both run front to back? I have seen people do it both ways, but was wondering which was better?