Home Theater Forum and Systems banner
cubes
1-9 of 9 Results
  1. DIY Subwoofers - General Discussion
    what should i do? i have an open living room that is 13x23x8.
  2. Ported Subwoofer Build Projects
    Hello All, I had Graham draw me up some plans for this project. Going to do a dual SI 15" D2 ported box. It will be 12 cu ft tuned to 15 Hz. It will sit under my projector screen and will house my center channel speaker. I will be powering it with a fan/heat sink modded Behringer iNuke...
  3. Home Theater Receivers | Processors | Amps
    I've had Bose double cubes for 8 yrs and love them but the more I research I'm finding that alot of people don't recommend Bose speakers. Am I the only Bose lover out there. What's the next best?
  4. Ported Subwoofer Build Projects
    Discussed the project beforehand here: http://www.hometheatershack.com/forums/diy-subwoofers-general-discussion/23415-avalanche-15-7-cubes-advice-needed.html The plans: 7 cubes, two 4" ports, 19hz It was not fun working outside below freezing! MDF dust literally froze to the ground and had to...
  5. DIY Subwoofers - General Discussion
    Hi everyone. First time posting here. This is my second DIY sub but first time trying a ported design so I could use some of your expertise. The sub is going to be 7 cubic feet tuned to around 19hz. It will have dual 4" precision ports 23" long and will use an Avalanche 15 driver. I am making...
  6. DIY Subwoofers - General Discussion
    So I went looking at houses today. I may be moving to a new home soon, and not only do I dedicate more than 20 cubic feet to a single sub in an LLT in-car, but I am brain storming my next LLT to use 4x8 sheets as panels. Roughly using 4 4x8 sheets as 4 sides, and cut 1 in 1/2 for the top and...
  7. Mobile Audio
    So this was a test box with a cheap sub till I could afford Maelstrom-Xs. I re-tuned to 19.5Hz, 24.5Hz, and "kind of" 33Hz... as that was the thickness of the wall, 3/4", and didn't seem completely functional. 7.75" sonotube. these are out of order, but here is the finished product 1st...
  8. Mobile Audio
    OK, may I have a fresh start? So I played with WinISD. I know, I didn't account for in-car effects. Please bear/bare with me? There is no 22" Fi subwoofer. So I used a Maelstrom-X to simply model 4 things. Bare with me there as well? 1: (yellow) sealed in recommended 2: (red) sealed in max...
  9. Mobile Audio
    SORRY NO PICS obviousely, the 22 doesn't even exhist yet... but here's stage 1 complete Took some quick measurements today, have about 48" X 32" X 24" externally, going with a 3" X 22.5" X 77" slot port. That makes 14.8 cubes before sub displacement. Making up for any errors, 14 cubes @ 12Hz...
1-9 of 9 Results
Top