I have a question regarding Wayne's article: "House curve: What it is, why you need it, how to do it!"
If I understood the idea behind it, there is a difference between the "perceived flat response as opposed to measured flat response."
So if I choose some house curve and I need...
The house curve makes the volume level high in relationship to the crossover point.
For instance, crossover at 60hz, using REW "Use Subwoofer to Check/Set Levels" to set sub level at 75dB...The SPL at 60hz ends up at 66dB...
With 24dB/oct, would I set the sub level using a 60hz tone only, and...
I have recreated the Bruel and Kjear target response curve for use in REW after not being able to find it on the internet.
I have now moved from to this curve full time for music and movies and very happy with the sound.
I hope one person finds this useful.
First time poster here and need some help on implementing a house cure or a hard knee house curve. I've read
Wayne's tutorial on both many times but I'm having some trouble applying it in real life and having it sounding good. The speakers are a pair of DIY JBL M2's and the...
I am currently using REW V5.14.
My measurement setup includes a 4189 B&K microphone and its preamplifier, and an Antelope Pure 2 external soundcard.
All my measurements show abnormal ripples, about 1,5 dB peak to peak, hereunder a Mündorf AMT, but I can observe the same phenomenon with other...
I am not sure if this is the right place for this, but figured with REW measuring, this might be the right forum. In trying to establish a "hard knee" house curve for my subs, I performed an RTA at 60Hz (my crossover) and then at 30Hz, 28Hz, and even 100Hz. When measured without equalization...
I did some measurements in Java but I'm trying to ASIO because I am full HDMI and can thus choose the output I want.
But I do not have the same curve in JAVA and ASIO ?
The curve changes on many frequency and level is not the same...
I want to try to EQ my HT by myself with some external devices to obtain an Harman like curve instead of using Audyssey MultEQ XT in my Integra DTC 9.8.
My home theater consist of an Integra DTC 9.8 sending his processing to 3 Crown CTS 600 feeding 5 Martin Audio Effect 5 and the LFE to a...
Hello everyone. I've been getting the hang of REW and would like to get some critiques regarding my before and after EQ curves.
My concern is the very narrow (0.200 BW OCT) 9db gain at 55hz to treat that null. Is that okay?
I also have a very narrow and deep null at 270 hz, could this be an...
Years ago when I last used REW I used a simple house curve: 20 Hz 8.0, 80 Hz 0.0. I see at some point it looks like new options were added in the target curve.
Specifically LR rise/start/end. Can this be used in place of a house curve? Do they do similar things? If so when's it appropriate to...
When working in the EQ window and creating filters I am often getting a warning from REW - something like "Warning: More than 77% of the measured values are above the target curve".
What's confusing me is that REW is recommending that when I tell it to match response to target. So if that is a...
I'm looking for help as to how to run a sweep with a corrective software EQ applied, so as to test my corrective EQ settings.
I spent a lot of time with REW doing a lot of sweeps and figured out the best position for my monitors, sub, and mix position (with the help of a consultant for...
Can anyone tell me what sort of curve I should use as a transition from a bass hard knee to the remainder of the spectrum on a full range target curve? My current hard knee is shown below.
Thanks for the help!
Hi This is Yuichi
I have created the house curve .txt file by using the keyboard. What I made was the the Equal Loudness compensation. But this kind of work is time consuming. Is there anyone know easier tool to create the house curve just using the mouse on PC or finger(s) in iPad?:dontknow...
So I got some new subs last week today I decided to try and get a nice sounding curve using the RTA feature instead of the measuring and adjusting back and forth way. I prolly need some practice but remember something Wayne said about using broad filters and as few as possible. Well i am using 3...
Giving it a go again - learning to use REW, after taking a several month long hiatus from this. The intent is not to test home theatre setups but rather to measure performance of various loudspeaker designs. If this isn't the ideal area of the forum for getting started, please do redirect...