Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Mitsubishi
    I have been in Computers all my life, just haven't done a lot in TV repair beyond some minor alignments etc. I got the Service manual from one of the links here and have been reading it. Here is the issue. In both standard and HD mode, my picture on the screen is to wide and to tall. I...
  2. RCA
    I have 2 RCA RPTV's chassis ITC222 in my basement atm, a D56W20 (mine), and a D52W27D(mother-in-law's friend's). They both are doing the power light flash 3 times thing... After some researching on the internet, I've found out this is quite common on these tvs. I read that capacitors CP150...
  3. Mitsubishi
    I have a 55807 (V17 Chassis) with a 2-3 deflection code. Pulled the chassis and have it on the bench, removed the deflection and power/convergance boards from the plastic frame. Gone thorugh the deflection board with a fine tooth comb. HOT is good, HV Out is good, Vertical Out looks good...
  4. DIY Repair and Maintenance
    when service manual tells him to turn deflection yoke for vertical raster adjustment, does he loosen belt clamps and literally turn the coil pack? is their an electronic adjustment dial?:reading:
  5. Mitsubishi
    I managed to get the unit to power up after replacing the caps on the DM power board, but now the picture comes on for a few seconds and then powers off. The diagnostic code I got was 23 -- Loss of horizontal deflection. Any suggestions on what to do? Paul R
  6. Mitsubishi
    So I went and did something stupid.. I was fiddling with my piece of garbage DVD player and had the svideo out from it going into the front input on my 55" mitsubishi. I fumbled with the power cord and sent some 120 through ground on the dvd player chassis and I assume through to the tv set...
1-6 of 6 Results