Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 322 Results
  1. AV Home Theater
    HI. Lately I've been trying to roll back the home theater system in our basement to 2023. The projector was replaced with a qn900b and I did some cleaning up of old hardware in the avr cabinet. I have a Denon AVR 1705 (with some 5.1 Bose from the same years) which I connected via optical. I need...
  2. Home Theater System Recommendations
    Hi all, My receiver (Onkyo HT-R391) has sadly decided to stop working recently. A mate of mine has these two receivers (Onkyo TX-SR507 & Denon AVR-1803) lying around until I can properly upgrade the receiver. Just wondering your thoughts on these two and which I should go with? Or even if it's...
  3. Audio Processing
    Hello, This is not regarding any problem, I just wanted to know how this miracle is going on. I have following HT setup. Sony KLV50W662F (Smart TV, non-android) to Denon X1200W setup through HDMI ARC cable. Denon is connected with TAGA Harmony 7.1 setup. Sony TV's Dolby Digital Plus output...
  4. DIY Repair and Maintenance
    Have a question regarding a Denon AVR 2311ci Receiver that needs repair. Using it for an audio-only setup, driving two speakers (set to 2CH mode). The unit powers up without any issue - no error codes or issues reported. Have a CD source connected to it. I do not get any audio from my speakers...
  5. Home Theater System Recommendations
    so as i have a defective brand new rx-v 685 sold to me ,i plan to repair and sell it off.the reason i chose yamaha was the music and build per se.the trust in build part is completely shattered at least.so if i have to buy a new one viz., denon x2700h vs another 685.which one wud u suggest is...
  6. Home Theater System Recommendations
    I recently upgraded my AV Receiver to a Denon AVR 2312ci I found at a thrift store for $30! It works very well! The only problem is my old receiver used a passive subwoofer and my new (to me) Denon uses an active port. I was reading that I needed an amplifier to use my passive subwoofer. I found...
  7. AV Home Theater
    Hello All, I am purchasing a new 4k hdtv soon, and I am wondering if there is a way for my 2012 Denon AVR receiver can process the 4k, assuming not, is there a work around or is a new receiver necessary. Thank you in advance to anyone that can help me, I am a novice! Kevin
  8. Home Theater System Recommendations
    Hello , last year i bought a new A/V receiver : DENON AVR-X2400H https://www.denon.co.uk/uk/product/homecinema/avreceiver/avrx2400h now it is time to get a new set speakers for my audio system. I use my system 50% for music and 50% for movies I would like a good speaker setup for both...
  9. Home Theater Receivers | Processors | Amps
    I am having a problem trying to hook up a ext amp to Zone 2 for stereo listening. I have the Denon set for 7 channel with front height and everything souns great. When I add a ext amp to zone 2 on another set of speakers it comes through as distorted like a blown speaker. The amp id a Carver...
  10. Home Theater Receivers | Processors | Amps
    Does this sound right? I watched Die Hard last night and I was @ -10 on the volume and I was hitting peaks of only 90db... Speech was anywhere from 45db-60db. This is with my Paradigm studio setup listed in my setup. I used to listen @ -30 on the volume with the same setup. I am running the 9.1...
  11. System Setup and Connection
    Up till now, I’ve used a Denon AVR-1906 for home theater use. It was connected via a 15-foot component video cable to a Panasonic PT-AE900E projector and performed without any problems. If I wanted to watch movies from the 1940s and 1950s, I could adjust the aspect ratio via the Panasonic...
  12. Home Theater Receivers | Processors | Amps
    I just picked up a factory Refurb 4311 and I can not seem to get the SW2 (subwoofer 2) preout working. I have enabled two speakers for the subwoofers in the speaker config menu. No sound comes out of my 2nd subwoofer when it's connected to the SW2 input. When I plug it into SW1 input it works...
  13. Home Theater Receivers | Processors | Amps
    Hello, I need assistance on which receiver to purchase. I have found a really good deal between 3 receivers, Denon X4000, Denon 4520 and Marantz SR7007. The X4000 and the Marantz SR7007 are approximately $100 in price difference and the Denon 4520 is approx $600 more in cost. I have not...
  14. Home Theater Systems | Equipment
    Poor old Denon looks out of place...
  15. Home Theater System Recommendations
    Hello, As discussed in my opening thread for help on 5.1 system, I purchased Denon 1713 and now looking for the options for my front and center speakers. I thought its a good idea to start new thread, as the discussion changed from original subject in previous post. Can you suggest me some...
  16. System Setup and Connection
    Hi, I've bought a brand-new AVR-1911 but I'm finding the manual (or me) a little hard to understand. What I'd like to do is have four speakers at the front of the room in a simple stereo arrangement. The medium-size stand mount speakers at the far left and far right would provide just about...
  17. Home Theater System Recommendations
    Hello, I am thinking of getting Denon AVR 1713 as my receiver. With all the help on other thread, I decided to start with bookshelf speakers rather than in-a-box 5.1 system :) I was wondering if Pioneer SP-BS22/C22/SW-8MK2 can be paired with 1713. The confusion came due to following specs and...
  18. Home Theater System Recommendations
    I am a newbie. I have had this Denon 2809CI for some time now. But, when I play it loud it will shut down in 5-10 mins. Since new. I have Deftek BP7006 front, Deftek BP2002 center, and Deftek BP (?) 2004?:blink: ( bookshelf ) can not find the model# on them. I am looking at upgrading to a Denon...
  19. Home Theater Receivers | Processors | Amps
    Hi, So I cannot find this info anywhere in this forum or online.I downloaded the manual and it is still not too clear on this... My question is as follows: Is it possible to have Zone 2 HDMI playing and have Zone 3 setup for separate speakers without needing a amp to drive the Zone 3...
  20. Home Theater Receivers | Processors | Amps
    I found them both for $350 refurbished. I don't really need any extra features just want the one that sounds the best. Thanks!
1-20 of 322 Results
Top