Home Theater Forum and Systems banner

designs

  1. Elemental Designs A7S-450 LT1300 Amp Died??

    Home Audio Subwoofers
    hey guys. I haven't been here in a loooooong time. anyway, nice to be back but I need some help. I have an ED A7S-450 sub...it's worked for many years, however, now the light on the amp is on but no sound coming from the sub. I have a feeling the amplifier burned out inside somewhere. I...
  2. SDX10 - Elemental Designs Enclosure.

    Creative Sound Solutions
    I have an old elemental designs A3-250, 10" 300 watt sub, with a bad driver. I'd like to re-use the enclosure and amp, so I'm wondering if the SDX10 would be a suitable replacement. The enclosure is a down firing, 13.75" x 13.75" x 24.5", 1.8-1.9 net cu ft, and it has a 3" x 17" flared port...
  3. Elemental Designs Enclosure Help

    DIY Subwoofers - General Discussion
    New to the DIY world and am looking for a little help on putting a couple of e5.10's in sealed enclosures. These are car subwoofers but I believe they will hold me over until I am ready to under-take SI HT18's in Marty's. I have a NU3000DSP for power. Any help in enclosure design would be...
  4. Elemental Designs 19ov.2 sub- let's make some sawdust!

    Ported Subwoofer Build Projects
    Hi everyone. I'm new on this forum and just did a search for this sub but didn't see any detailed builds. I have a dual 2 ohm one sitting here and would like to build a box tomorrow for it, it possible. Since their website is not only down, but it's also setup more for car audio, can you guys...
  5. Elemental designs eq.2

    Electronic Processing/Equalization Devices
    Any one have a power cord or know where the cheapest place to get one is? Thanks
  6. Hello from new member who designs musical instr. gear

    New Member Introductions
    Hi Everyone. I don't have a theater in my home but I do have an electronics lab! And an avid interest in acoustics...
  7. SEOS 12 and Elemental Designs TD12

    DIY Speakers
    So, all these new speaker designs using horns and super-tweeters seem to be the rage. I have been skeptical about designs with the SEOS waveguide and compression horn tweeters from my past experience with horns, but the builds for these have been popping up left and right with a huge following...
  8. New designs

    DIY Speakers
    Danny, How are your new designs coming? Would any of them be something like an MTM with Neo10's & Neo 3 plus a woofer, either the M165NQ or a servo controlled 8"? Looking ahead for after I finish the X-MTM, CS, LS encore set. Mike
  9. Gatti's loudspeaker designs?

    DIY Speakers
    Has anyone heard one of Gatti's speakers? I'm always looking ahead for the next project, and now that I will have room for some floorstanders, I am on the hunt for a large 3 or 4-way design that will keep my speaker-building addiction at bay for awhile. Statements are #1 on my list, but I...
  10. Ported box designs - what would you pick?

    DIY Subwoofers - General Discussion
    Attached are a couple of box designs I am considering as an alternative to my Sonosub plan As per the Sonosub thread, gear is Mach 5 IXL 18.2.2 and Behringer NU3000 amp. Measurements are in metric (mm). If someone/s want to have a look over my designs and see if there is any glaring issues...
  11. Advise a rookie on ways to improve designs

    DIY Subwoofers - General Discussion
    I'm new to this hobby and as a result - even though I've spent a few days reading on topic, some things are still not quite "clear" to me. Lets look at the following setup. Low budget build. 50%HT 50% music. Dayton Audio SD315A-88 12" driver and Yung SD200-6 200W Class D Subwoofer Amp Module...
  12. Sony's 2013 LED models with new designs, features

    Home Theater, Audio and Video News
    Source: FlatPanelsHD
  13. Subs, Amps, Designs? where to begin

    DIY Subwoofers - General Discussion
    So i've been lurking on this forum for a long time, seen lots of neat and interesting builds :T and would like to do something on my own I guess some info you would need I have a Yamaha HTR-6090 reciever, currently have a Velodyne DSP-12 which is nice but i want more my room is 25ft x 15ft x...
  14. Resolving Issues with Elemental Designs

    Home Audio Subwoofers
    This was posted over at AVS. With all the issues going on I though I would post it here as well to help those with any problems. This is a direct copy of what was posted on AVS. Contact was made today with an investigator from the Iowa Attorney General's office who handles consumer...
  15. Complete beginner, looking for designs

    Sealed Subwoofer Build Projects
    Hi Everyone, I've been looking for years to get into DIY. Unfortunately, I have pretty much no wood working experience. I'm decently handy - car and home repair, and a little home remodeling construction - but never have had the chance to really build anything other than precut furniture. In...
  16. Elemental Designs 190v.2...

    DIY Subwoofers - General Discussion
    Any input on what this sub would do with 1000 watts in 8'³ tuned to about 12-14Hz?
  17. Elemental Designs 15A.22

    DIY Subwoofers - General Discussion
    I came across a deal I couldn't pass up on an Elemental Designs 15A.22. It seems to have been designed to be for car use, but I'm wondering if it would make a decent home theater sub. Size limit would be around 11 cu ft and power input would be either a 500w plate amp or maybe one of the new...
  18. Rear Surround Designs with small footprint

    DIY Speakers
    Hey everyone, I have been doing some speakers projects for the last 5 or six years. So far, I have built two NatP's, a Modula NeoCC, and a PE Kit (BR-1 novice kit, I believe). I am currently in the process of building a new sub but I also wanted to replace the heavy BR-1's as my rear...
  19. Any pro audio DIY designs for HT?

    DIY Speakers
    The reason I ask, is pro audio speakers are much more efficient. I did a little google search with no real results, but I was wondering if their are any designs for home theater speakers using pro audio drivers.
Top