Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. REW Forum
    I recently purchased a umm-6 from parts express as my first jump into REW. While setting up the measurements (preferences in REW), it seem that the measurement levels are very low. I output a -12dB sweep 'Check Levels' tone, and only measure a -53dB response. This is with the mic placed directly...
  2. Classifieds - Speakers and Subwoofers
    PROJECT CHANGED - NOW SELLING THE DRIVERS ...SEE AD POSTED 5/11 I have two exetremely rare AV123 MFW-15 Drivers "As New" Condition...I have held on to these in hope of finding another MFW-15 enclosure to add to the existing Rosewood MFW-15 I already own...its has not happened. The Boxes /...
  3. DIY Subwoofers - General Discussion
    Finally got my cabinet built. 25x25x25 cube with two EX PR-18's with 1600 grams mass on each one. Amp is Crown XS900. Using a minidsp with a bi-quad programmed high pass filter at 13hz. Got everything hooked up and playing a bass test tone at 24hz quarter volume. Sub sonds terrible. Scraping...
  4. Electronic Processing/Equalization Devices
    Well, after 10 days of waiting, I took the day off today to accept delivery of my BFD (FBQ2496) as it was sent signature required. You could imagine my excitement when the doorbell rang! Unpacked it, plugged it into the wall (without plugging in any inputs/outputs), just to fire it up and see...
  5. Subwoofer Amps | High Pass Filters
    Hi there, Got a brand new EP2500 a couple days ago from PE via Amazon, but I think it's DOA... I've tried a variety of configurations, but I get very little output, even at max gain. I cannot believe that this can be correct... I've connected it in briged mode, with the DIPs set this way...
1-5 of 5 Results
Top