Search Results for ‘doesn't’

I can't cal my new RME HDSPe soundcard. The results I get kinda look like the common "loopback" error, but it's more convoluted than that. Also, I get the "impulse isn't where it should be" message. One other thing - I can monitor the feed from REW through my mixer and I notice that the impulse...

I have a onkyo 606 receiver and it does not like my htpc. At first I was using dvi out with hdmi adapter and optical audio. I was able to setup the receiver so that it routed the optical audio to that input. I would get weird audio drop outs. However if I unplugged the video to the receiver the...

I'm just about to start a build on a little 8" ported sub, basically using stuff I've already got laying around. The scavenged plate amp I'm using was originally designed for a sealed sub, so I'm almost positive it doesn't have a high pass filter. I know a filter would be a good idea, especially...

from what i've read on here, and from other people's graphs i've seen, if you take a measurement of your sub preout, response should match up exactly with a flat target thats configured with the same crossover and slope, right? below are some graphs of my preout measurements, which as you can...

I've done some measuring with REW and just got a BFD1124. From my graphs it looks like I have some frequencies that I should want to boost.....but REW only finds those peaks that need to be reduced. I suspect that the dips are caused by the room...but boosting them does seem to change the...

I am baffled by Sony - - they have had 3 software updates since I got my BR player and they have only been available by download via Windows. One of the reasons I initially selected BR over HDDVD was that Apple was behind the system and had indicated that it would be incorporating BR players...