Home Theater Forum and Systems banner
drifting
1-2 of 3 Results
  1. Sony
    I've recently replaced the convergence IC's on a Sony KP-65WV700 as well as a resistor that was shorted. I am now able to achieve proper convergence per the service manual instructions, or via the user menu; however, upon saving those settings and turning the TV off, the convergence begins to...
  2. Toshiba
    Since repairing the power supply and resolving the jittery image problem I have calibrated my set in service mode for both standard and hi-def mode. The picture looks great. I have noticed however that the calibration tends to drift a bit on the outer edges after week or so. What would cause...
1-2 of 3 Results
Top