Home Theater Forum and Systems banner

dual

  1. Single LLT vs dual sealed vs dual small ported

    DIY Subwoofers - General Discussion
    I built a 12 cubic foot LLT about 3 years ago and I am very happy with it. My issue now is that there is not much transparency with a single sub. If you sit in one corner the bass is amazing, but it drops off drastically as you move away from the corner. The LLT was my first build and I did not...
  2. Room design question re: dual sub placement

    AV Home Theater
    I'm rebuilding my basement theater. It's irregularly shaped, as shown in the attached drawing. The screen wall (on the left of the drawing) is 14' 1" wide. The main part of the room is 15' 9"' deep, but halfway across it goes back another 6' 3" into a recessed area. My wire-frame equipment...
  3. How to "bass crawl" to place dual subs?

    AV Home Theater
    I'll be rebuilding my basement theater in a few months - it had to be demolished to fix a structural problem in my basement, and I'm going to dual subs in the process. (My new AVR is supposed to be able to correct each sub independently, in addition to decoding Atmos and DTS:X.) I've read about...
  4. Measurements required for analysis of 5.1 with dual mono subs

    REW Forum
    Hi please can someone tell me measurements required for my system. Main speakers Energy Veritas 2.3i and centre, velodyne dd12 and dd15 dual mono, receiver Yamaha Z9. Thanks in advance
  5. Help with Dual Sub Calibration

    REW Forum
    Hi there! First time poster here. I have been working through learning how to calibrate my home theater over the past year (much to my wife's amusement) and have made the investment in REW (including donation!), a Umik-1 and a proper mic stand. I have been doing my best to balance my...
  6. Dual layer DVD question

    Blu-ray | DVD | Disc Media Players
    I'm curious how a laser knows which layer to read in a single side dual layer DVD. It seems like it could easily read data from the second layer while it's shining through scanning the first.
  7. I.S.C.T – ‘Poetry Of Sounds’ Point Source w/ Dual Sized – Floating Face Plate(s) ….

    DIY Speakers
    I.S.C.T – ‘Poetry Of Sounds’ Point Source w/ Dual Sized – Floating Face Plate(s) …. Living for years now in an Artists community it is unavoidable to come across and meat people of many different Interests including performance Artists as well as musician etc. Anyway, a few weeks back I had...
  8. I.S.C.T – ‘12” Cylindrical Sub Enclosure’ as a (Sealed/Vented) with Dual Side Walls ….

    DIY Speakers
    I.S.C.T – ‘12” Cylindrical Sub Enclosure’ as a (Sealed/Vented) with Dual Side Walls …. Finally getting to work on the first (Test project D) - ‘12” Cylindrical Sub Enclosure’ in a (Sealed/Vented configuration) and for the first time in a set up with Dual Side Walls = Dual Tuned Compartment...
  9. Owen's Dual UXL-18 Sealed Build

    Sealed Subwoofer Build Projects
    I've been really looking forward to the subwoofer part of our eventual basement build, and I finally have made progress on that front. I knew for a long time that I wanted to try a sealed approach this time, having had 2 different ported subs before (and currently). I thought I'd go for a pair...
  10. Dual Opposed HST 18's

    DIY Subwoofers - General Discussion
    I am thinking of doing something a little different and was curious if anyone has done a DO box with HST18's? If someone has any thoughts on performance sound quality etc pretty much just wondering if there are any advantages over a 4cuft sealed box I am aware I need two 4cuft sealed but if I...
  11. SDX12 or UM15 dual subs

    DIY Subwoofers - General Discussion
    So currently my setup consists of Klipsch RF-82ii, RC-62ii and two sets of RS-52ii's for sides and rears. I have one SW-112 and my room is about 14x18x8. It is solely home theater use. I do plan on making it bigger at some point so this will be for the future too (currently converted living room...
  12. Dual sb-13 ultra vs one pc-13 ultra

    SVSound
    Hi ! Former owner of a pb-13 ultra (so I'm all ready spoiled) but because of WAF / new living room arrangement I had to sell my beloved pb-13. I was recommended to buy the sb-13 ultra and while it does sound great - I miss the sound I had. Before the pb-13 I had the pc13-ultra (both pb and pc...
  13. Dual PSA S3600i vs. dual SVS PB13-Ultras – Finding bass nirvana and lessons learned

    Home Audio Subwoofers
    I’ve had the good fortune of having a pair of dual SVS PB13-Ultras (with the BASH amps) in my 1,700 (12’ x 16’ x 9’ H) cubic foot room. I’ve run them extensively in 15 Hz, 20 Hz and sealed modes seeking bass bliss. The PB13 Ultras sound great, no denying that – however, I never quite found...
  14. Dual Sealed UXL-18 Planning and Build Thread

    Sealed Subwoofer Build Projects
    I was recently able to just squeak in to a group buy for a pair of Mach 5 UXL 18s, and I jumped on it before I had a chance to do much research or planning. I took enough time to assure myself that the price was right, and that they were still solid performers, and the local Canadian source (no...
  15. I.S.C.T. 1st Images of new dual 8” - 12” PR Enclosure Template Build Up ….

    DIY Speakers
    In all my research over time I have mostly been looking for Driver chassis which are distinctively different and suited in correspondence to some of my own enclosure ideas. The two driver chassis I became extremely interested in, and these I found only a few weeks ago were the ‘Tang Band W8-740P...
  16. Dual SVS PB-1000 or Single PB-2000 or Klipsch R-115SW

    Home Audio Subwoofers
    So a while back my 8 year old Klipsch RW12d died on me. I debated going the DIY route, but I've scrapped that idea. I just don't have the time and I'm missing some important tools to complete the job which would make it an expensive and time consuming venture. What I'm left with now is...
  17. Noob question about INUKE 6000DSP + dual subs

    Subwoofer Amps | High Pass Filters
    Hello folks, I've just ordered two subwoofer combos from Parts Express (18" Dayton HO driver and the knock-down 4 ft^3 enclosure). I'd like to run it with an Inuke 6000DSP. As you can probably tell, I'm very new to this. I'm clueless regarding pro-audio stuff. What confuses me is I...
  18. I.S.C.T. Speaker with dual 'Sealed & Vented' compartment enclosures ....

    DIY Speakers
    Hi there, I have been over the last three month or more working on my drawings for one of my 5 upcoming and new I.S.C.T (Innovative Slice Construction Technique) Sandwich build type enclosure projects, and unfortunately I can’t find a lot about the subject at all in my own manual nor the...
  19. Behringer Nu3000DSP or NU6000DSP to run dual mono?

    Subwoofer Amps | High Pass Filters
    I need and amp to run two different subs in my HT rig. I've got a dual Parts Express 15 driver infinite baffle and a sealed Tempest sub. I would like to drive each off a different channel of the same amp. The amp would see a 4ohm load on each channel. IB drivers wired parallel and the Tempest VC...
  20. dual um15 build

    Sealed Subwoofer Build Projects
    The enclosures are approx 4cf before bracing and sub. The pair of ultimax 15s are powered with an inuke6000. Test fit in the housing that sits under the screen. Painted the front of the enclosure so nothing will be seen through the grill. Now I just have to make the grills...
Top