Home Theater Forum and Systems banner

dvc

  1. ?? about the 15" TXX-BD 2 Ohm DVC Subwoofer

    DIY Subwoofers - General Discussion
    does anyone know what the watt rms per coil is on the audiopipe 15" TXX-BD Series 2800W 2 Ohm DVC Subwoofer im tring to find out if one per channel can be powered by a the crown 1502 which puts out 550watts at 4ohms an 775 at 2ohms im tring to deside if i want to run as a 4ohms 2 channell amp...
  2. Sealed 15" Dayton DVC385-88 build

    Sealed Subwoofer Build Projects
    I am building this pair of sealed subs for a friend. Sadly, it appears that the Dayton DVC385-88 has been discontinued. I aimed for a usable internal volume of about 3 cubic feet. I cut most of the parts and decided to glue two panels from scraps to use for the Inner Baffle layer. Here...
  3. Need Help wiring up 2 Ultimax DVC 15!!

    DIY Subwoofers - General Discussion
    Hello HTS.. I am trying to wire up my 2 15 Ultimax DVC subs. Each sub is dual voice coil at 2ohm's. Is there a way to wire these subs up to I can run my amp at 4ohm mono? Thank you
  4. Beginner amp and subwoofer wiring help - 4 channel amp for 2 4ohm DVC subs.

    Subwoofer Amps | High Pass Filters
    After many hours of research and frustration, im still unable to find a way to wire my subs up correctly. It may be that my 2 subwoofers are unable to be wired at the correct impendance for my amp. I have the 4 channel Fusion PF-4004 amp, found here: [link removed because of post count] The for...
  5. Looking to power 4 15" Dayton Ultimax DVC. iNuke 3000 or QSC PLX 3402?

    Home Theater Receivers | Processors | Amps
    I am almost finished my home theater!!! Finally!! I am looking to buy an amp to power 4 15" Dayton Ultimax in a sealed box. I am currently looking at 3 amps and wondering the follow: iNuke 3000 QSC PLX 3402 Crown XTi 4000 Is the QSC PLX3402 or Crown XTi 4000 amp a good amp for driving...
  6. Question about Sub drivers and DVC wiring

    DIY Subwoofers - General Discussion
    Hello. My Father has purchased a Crown XLS 1500 amp for use in his studio. I'm considering building him a subwoofer rather than him purchasing one. I'm really liking the Dayton Ultimax series. What I would like to know is the XLS 1500 he just purchased has Speakon outputs. If I were to build...
  7. Dayton DVC 15 sealed build

    Sealed Subwoofer Build Projects
    ok, One of my THT's that I bought from a some guy on another forum just kinda bit the dust (long story short he slapped it together and their was leaks that I couldn't detect till now as I've gotten better at finding them... all around, the cab, the woofer etc)... so I'm just gonna salvage the...
  8. four dayton dvc385-88

    Ported Subwoofer Build Projects
    Hi everyone, ive currently got two of these 15" drivers in 9.5cf of space for each and tuned to 14hz. I am thinking of redoing the theater and wil have more space for subwoofers so im thinking of four and giving each a bit more space like 11 or 12 cf. Ive already got the extra drivers. The...
  9. Dayton Audio UM12-22 12" Ultimax DVC Subwoofer

    DIY Subwoofers - General Discussion
    Good afternoon! I just noticed these new drivers on PE this morning while looking around at "Cyber Monday" deals. Has anyone seen them yet? http://www.parts-express.com/pe/showdetl.cfm?partnumber=295-512 They appear to be a good bet for HT use: THIELE-SMALL PARAMETERS Resonant Frequency (Fs)...
  10. Dayton DVC-385-88

    DIY Subwoofers - General Discussion
    Hi guys, can someone tell me something about this sub? It seems to have decently low FS and good xmas and actually playing around with modeling subs, it doesnt look all that different than the Dayton reference 15" (not the high output version) so I'm wondering if there is any major downside...
  11. 18" avalanche vs. 2 15" dayton dvc

    DIY Subwoofers - General Discussion
    thinking i might sell my avalanche in the summer and buy 2 dayton dvc subs and put them in sonotubes. is this a good idea? the avalanche has 27mm of xmax vs the 15mm of xmax the dayton dvc has..... is that difference audible? what size sonotube should i put them in? i was thinking something...
  12. DVC sub

    DIY Subwoofers - General Discussion
    Hi Is it advisable to run a stereo signal into a dvc sub(1ch per coil), or better to run a mono signal into a bridged amp? For a 2ch setup, if you run a mono sub, will it sound unbalanced as you will either have left or right channel bass? Cheers Matt
  13. Dual opposed with dayton DVC385-88

    Ported Subwoofer Build Projects
    how do i model a dual opposed vented enclosure with the dvc385-88? this will be my first sub build. i dont see this option in winisd. Thanks again
  14. Wanted: TC Sounds Epic 12" DVC Subwoofer

    Classifieds - Speakers and Subwoofers
    Looking to buy a single TC Sounds Epic 12" DVC Subwoofer or other high x-max subwoofer that works well in 3.5 cu.ft. tuned to 25hz. $193 shipped at Parts Express. Willing to pay $160 shipped.
  15. Wanting to confirm some cabinet specs for some Dayton DVC Subs / cabs

    Ported Subwoofer Build Projects
    So I'm planning to build 2 matching subs for my home theater system which will actually also serve as stands for my front speakers since they're bookshelf type speakers. What I've been thinking is that I don't need tons of bass, and I want to do it cheap, so I got looking at these Dayton...
  16. Ported enclosure for TC2+ DVC 12?

    DIY Subwoofers - General Discussion
    I recently acquired a pair of gently used TC2+ DVC 12" drivers and wanted an opinion if these are suitable for use in ported enclosures. When I modeled them in Unibox I came up with 3.8 cu ft with a 6"D x 29"L port and a F3 of 24hz. Does that sound reasonable or did I do something wrong (never...
  17. Dayton 15" DVC in modified Adire box

    DIY Subwoofers - General Discussion
    Hey yall This is my first DIY speaker. I based the design on the Adire Tempest Adire Alignment plans (214l tuned to 15.4 Hz). I moved the driver to the front of the cabinet, 3" from the top because of space limitations (natural problem with this sub). I also moved the cuts in the braces to...
  18. FS: Dayton 15" DVC & Dayton Quatro 15

    Classifieds - Speakers and Subwoofers
    FS: Dayton 15" DVC (SOLD) & Dayton Quatro 15 (AVAILABLE) 1. I have one Dayton 15" DVC in very good/excellent condition, not driven hard, the only thing is the tiny board that holds one of the pairs of push terminals together has split. Asking for $70 OBO plus shipping from 32444. Paypal only...
  19. wiring 2 channel amp to dvc?

    Subwoofer Amps | High Pass Filters
    In wiring a 2 channel amp to a dvc, do you run one channel to each coil? that just does not seem right.
  20. PE buyout 12" TC Sounds DVC

    DIY Subwoofers - General Discussion
    I'm just wondering if anyone was building or planning a build using the PE buyout subs? :scratch:
Top