Home Theater Forum and Systems banner


  1. Do I need a Behringer ECM8000 Cal file?

    REW Forum
    I did some searching here and a brief amount of reading. I get the impression that I need a calibration file for my Behringer ECM8000? Any helpful hints? Regards, Dan
  2. N00b: Preamp for ECM8000 and UCA222

    REW Forum
    I purchased a UCA222 and was running REW using my RadioShack Digital SPL Meter and inputted the data into my Emotica UMC-200, but the sound is very muddy. I suppose this makes sense since it only good up to 3Khz. So I decided to purchase the Behringer ECM8000, but now it appears that I need to...
  3. Confused with setting gain level on mic ECM8000

    REW Forum
    Hello. I have ECM8000 Behringer microphone which is connected to USB soundcard. So, when trying to measure a room, I am stuck at a point where I need to calibrate microphone. REW guide says that if I have a calibration file with sensitivity parameters I can skip this step. However, although I do...
  4. ecm8000 with u-phoria um2 calibrate

    REW Forum
    hi guys, i got the ucm8000 mic, and the u-phoria um2 usb interface, and im kinda lost with how to calibrate REW. what should connects to what and where? i tried to search but didnt find straight answer. thanks in advance!
  5. ECM8000 Sensitivity (open-circuit sensitivity)

    SPL Meters | Mic's | Calibration | Sound Cards
    Hello friends I have a new Behringer ECM8000 microphone that I want to use for SPL measurements. I need to do that its sensitivity in mV/Pa. The attached technical specifications sheet says the sensitivity is 70 dB (positive and without any other unit). I thought it was an error given that...
  6. ECM8000 uncalibrated - inaccurate

    SPL Meters | Mic's | Calibration | Sound Cards
    Hi, I have been using REW with an Alesis io2 soundcard and with an ECM 8000 mic. I am about to receive my active crossover and started doing some measurements for treble and bass in my speakers to measure the crossover point when found out that my ECM might be giving me inaccurate measurements...
  7. 2 question on ecm8000 and spl meter, please

    SPL Meters | Mic's | Calibration | Sound Cards
    Hello and thank you for you help. 1)what is the difference between calibrated and not-calibrated ecm? 2) If I have a calibrated ecm 8000, do I need spl meter too? Or can I go with ecm only? Thank you in advance.
  8. DEQ2496+ECM8000 as SPL

    SPL Meters | Mic's | Calibration | Sound Cards
    Hi I have DEQ and ECM8000 which I know are working, the auto EQ is functioning OK. Tried to use them as a SPL meter (page 2 in "meter") but can't get any readings. The readings are constant abt 70dB under "A" weighting and abt 96 dB under "C" and "off", no level changes, frozen. Other two pages...
  9. M-Audio Fast track Pro and ECM8000

    SPL Meters | Mic's | Calibration | Sound Cards
    Hello! I am looking for some advice and guidance through the jungles of REW. I have been bumping my head against a wall here and even reading for days seems to have not born any fruits. Running WIndows 7 (64bit), M-Audio Fast track Pro and a EMC 8000. Here is my loopback for the Fast Track...
  10. Problems with REW 5 on a Mac + ProFire 610

    REW Forum
    Hello folks, I recently got the REW 5 in the pursuit of treating my small studio room. It' s installed on a Mac Intel DualCore Duo with Snow Leopard. The mic is ECM8000 connected to a M-Audio ProFire 610. The idea is that I cannot properly calibrate the audio interface. In preferences I can...
  11. Measuring LF Response with ECM8000

    New Member Introductions
    Hello everybody, I'm Dimas From Argentina and want to get some response from a Bass Reflex that I've designed I'm planing to use Room EQ Wizard and a ECM8000 Mic. Do you have any suggestions like :coocoo: Uooooou You need another mic or yes!!!!:clap: it's OK !!! go on !!!! Thank you !!!!!!
  12. ECM8000 vs panasonic61 cond mic

    SPL Meters | Mic's | Calibration | Sound Cards
    I have an uncalibrated ecm8000 microphone ,One thing I always found was its power supply is is cumbersome . to make it portable I had to use 3nos 9v battery ,yet I wasn't happy with the result. Hence I am deciding to build one using those famous wm61 cond mics. Suddenly I had a thought can...
  13. ECM8000 with UCA202 -- phantom power mandatory?

    REW Forum
    Hi All, I just received my ECM8000 and tried to use it with a Hosa XLR female to RCA adapter to connect to the UCA 202 but it does not seem to work. One of the pins in the Hosa adapter seems to be loose so that could be the reason. I am planning to pickup a new RCA female to XLR cable next...
  14. Difficulties With ECM8000 Phantom Power / Levels?

    SPL Meters | Mic's | Calibration | Sound Cards
    Hi Gents, I'm a new user of Home Theatre Shack, and have just started trying to use Room EQ Wizard :) I've purchased a Behringer ECM8000 Microphone, and have this connected to a Behringer PS400 Phantom Power Supply. The output from this is XLR, so I have an XLR to 1/4" Stereo Jack lead, and...
  15. Another Newbie question: RS SPL meter enough for sub integration or do I need Behringer ECM8000?

    REW Forum
    Hi, Audyssey seems to set my sub (JTR Cap S2) 6-10 dbs lower than the rest of the speakers (JTR Quintuple LCRs, Def Tech BPVX surrounds, Def Tech SM 450 Front Heights). Over the weekend I am planning to use REW to analyze and manually level match them (and also try pre-setting the sub to 75 db...
  16. Sound Card, ECM8000,Laptop PC

    SPL Meters | Mic's | Calibration | Sound Cards
    I just don't get it . . . I try . . . How do I get everything working? I read but it is difficult for me to understand. I have a mic. I have a Focusrite Scarlett 2i2. I have a PC LapTop. Do I still need to purchase a SPL Meter? I connected the left ch output on rear of 2i2 to the mic...
  17. Calibrated ECM8000 MIC

    Classifieds - Wanted
    WTB calibrated ECM8000 mic. PM me if you have one for sale. Regards, Dan
  18. Measure sound level with ECM8000 and REW?

    SPL Meters | Mic's | Calibration | Sound Cards
    Hi Folks, I have been given the task at work :foottap: measure sound level from the fan's on our product to demonstrate to customers using a GUI. I dont need anything too costly , just a general indicator. I have been looking at the SPL meters but are a little costly. My plan !! 1.Use REW...
  19. REW, nothing above 10khz with ECM8000...?

    REW Forum
    I am getting massive roll off above 10 khz with an ECM8000 - is this a user error or a bug...? Because with IK Multimedia ARC system, using the same preamp I get way more top end. The REW pics show, both speakers together, with and without the Event Opal's onboard EQ. And then the EQ'ed left...
  20. Is there a cal. file for ECM8000 here?

    SPL Meters | Mic's | Calibration | Sound Cards
    Is there a cal. file for ECM8000 here? If so, where can I find it. Thanks!