Search Results for ‘emm-6’

I recently got the Mobile Pre USB soundcard and a calibrated Dayton EMM-6. I went through the steps and performed Soundcard Calibration, checked levels and calibrated the SPL readings. But when I try to perform a measurement, it gives me a decent result for low frequencies, but at higher...

I have upgraded my REW from a RS SPL to a EMM-6 microphone with the Xenyx 502 amp. Can someone point me to a link or posting that provides basic instructions for setting up and using the new mic/amp? I have downloaded the EMM-6 calibration file and configured it in the REW preferences. I...

Managed to get this combination of hardware working in REW, and wanted to explain my steps ** Calibrating the Art Usb as a "Soundcard": The "ART USB dual pre" (herein ART) was set as an input AND output device following the "REW and OS X" instructions on hometheater shack On the ART, I turned...

As many here know, Parts-Express has been selling the Dayton EMM-6 microphone, which comes with with individualized 20Hz to 20kHz calibration curves. I have been reselling these mics from time to time with calibration curves from 5Hz to 25kHz (Basic models) and polar information (Premium...

Hi again, I have another question about the Dayton EMM-6 Mic. Has anyone bought one of these recently and downloaded the "unique" calibration .txt file from Dayton based on your serial number? If so, maybe we can exchange calibration files and see if they are really unique or if they are the...

Hi, Does anyone know what the correct orientation for the Dayton EMM-6 mic is for Room tuning measurements. Should it be pointed towards the ceiling or perpendicular to the ceiling and pointed at the speakers or center of speaker pair. There is no info on Dayton's site or Parts-Express site...

http://www.hometheatershack.com/images/emm6.jpgHome Theater Shack and Cross-Spectrum Labs will be giving away three (3) calibrated Dayton EMM-6 Microphones. These mics are calibrated by Cross-Spectrum Labs from 5Hz - 25kHz. There have been several members who have stated that they cannot...

http://www.hometheatershack.com/images/emm6.jpgHome Theater Shack and Cross-Spectrum Labs will be giving away three (3) calibrated Dayton EMM-6 Microphones. These mics are calibrated by Cross-Spectrum Labs from 5Hz - 25kHz. There have been several members who have stated that they cannot...

Thank you Herb, I received my Dayton EMM-6 today. I am not able to reply to Herbs Original thread. Just a quick question. How do I use the .FRD calibration data files that are on the minidisc with RoomEqWizard plz? Will REW just open them up? Eric

Hi, I recently ordered the emm6 calibrated mic from cross-spectrum labs, and my goal was to use this to measure in room frequency response via my laptop and REW. First of all the sensitivity of the mic seems very low, should I have some mic preamp or something in between the mic and the...

http://www.parts-express.com/images/item_standard/390-801_s.jpgIn case you missed the email and for those who may not choose to receive admin emails... We have had several members interested in a calibrated microphone deal. We wanted to be sure you are made aware of this special offer for...

I apologize if starting Yet Another Dayton EMM-6 thread seems excessive but since this is time sensitive, I wanted to make sure I got your attention. Parts-Express is having a sale on EMM-6 microphones: $39 + shipping! Being the magnanimous guy I am, I figured I'd calibrate a few EMM-6 mics...

Dayton Audio has started selling the EMM-6, which looks to be another Superlux OEM'd mic in the same family as the Nady CM-100 and the Behringer ECM8000. The biggest difference is that each EMM-6 appears to come with it's own individual calibration curve (a graph only, but it's easy enough to...