Hello! Well, I received my EMM-6 yesterday and had time to play with REW today and golly if I didn't actually get it to work first try. But ..... When I got the mic I was given a web address to download the cal file for it, but it's just a bunch of numbers in Notepad (.txt file) How do use this...

hello: i am going to start gathering studio room response measurements and am not sure how to point my dayton emm-6 in relation to my speakers. i have heard several explanations of the direction- e.g., "upright", "pointing up", etc. from that i would expect to set the mic up so it looks like a...

I just bought a used emm-6 to work with a behringer deq2496 audio analyzer. I wanted something to plug and play right away before stepping into what appears to be another level of involvement with REW and one of the popular mics oh, but no output so I will still need a Tascam us-122/144 to...

hi all I want to measure my home theater room and my diy speaker. so its shopping time but i want to make sure they will all work with my windows 7 pc before order them. uca 222 (i already have), ps400 and emm6 will this work for REW. thank you in advance nate

I have a Emm-6 mic. From Cross spectrum labs. I want to use the spl meter in REW to adjust the levels of my 5.2 system. 1. I know to measure the front part of my system i just point the mic forward at the front part of the system. But what about the side speakers. Should i turn the mic to...

I came across lot of discussion about measurement mic and their calibration. Dayton EMM-6 provides calibration file if you enter the serial at their website. Cross-spectrum charges the 30$ extra for mic to get it calibrated. There is also a calibration value file at download area of this...

I've decided to graduate from my analog RS meter to a microphone, probably the Dayton EMM-6 (unless enough people convince me to get the ECM 8000). I would appreciate it if someone would perform (or point me to the results of) a full-frequency sweep using: 1. the generic calibration file...

Well, I'm new to REW and calibrating...so I have a few hardware questions. I plan on buying the EMM-6 Mic. I am aware that it needs phantom power. So I have a Mackie CR-1604 Mixer. I read the manual and it says it's capable from 20Hz to 20kHz (seems good enough to me). Then I would in theory...

Hi all. what a fantastic resource this forum is with great expertise and loads of hitech info. As a raw newbie I would like some help. I have searched at length but am still not sure as to whether the gear I have will work with REW. I have a calibrated Dayton EMM-6 mic, MXL MicMate Pro USB...

Hello all, I"m just learning how to use rew, and already got most of the hardware for it. I picked up the Emm6 with the OSP USB adapter for a 48v phantom power, and I also have the audysey mic for my onkyo rc180. Since I have no rca out to the amp at the moment so i thought i would measure my...

I'm a relative newbie here, & getting ready to begin some REW measurements in my space. A quick question regarding cal files for the Dayton EMM-6: I have downloaded from Parts Express; my "SN-specific" calibration file. However; somewhere here I have also read that I might be better off using...

Does anyone happen to know if the calibration file included with EMM6s is worthwhile or not? The features mention that it includes "unique printed and downloadable calibration response graph and data". I'm likely to order one from Cross-Spectrum labs, was just curious what the one that's...

I have the following rig that I would like to use to measure the response of the Audioengine A5 powered monitors. 1. Dayton EMM-6 Electret Measurement Microphone (downloaded the calibration file) 2. Presonus Inspire 1394 Firewire Audio Interface with phantom power 3. Powebook G4 running Leopard...

I have been using a Radio Shack meter as my mic to do my measurment for the past few years. I just got a calibrated EMM6 from the group buy. I also have the Behringer 502 mic pre amp. I compared measurements between the two mics and they closely follow the same curve but he EMM6 is showing the...

Hi, Already received the calibrated EMM6 mic from Herb and M Audio Fast Track external sound card yesterday in good condition. I'm novice, please advise 1) how to use/install the mini disc that come with the EMM6 mic 2) do I need to go thro' the step of cabibrate the sound card as...