Search Results for ‘eqing’

lashlee, Per your post Here I can only make a few extra comments as I do not really understand all the ins and outs of EQ. I do have an idea on some basics. Basics: > The Schroeder frequency is normally considered to be in the 200-300 Hz range for small rooms. It is the upper frequency that...

Hi please someone help If we measure Left>Right>Combined wouldn't it be best to do analysis e.g. EQ on the average of left & right, this would take out the discrepancies e.g. timing? Thanks

Ok, so I decided to do some EQ'ing of my system. All subs are crossed to the mains at 100Hz in my AVR. Equipment: (All subs are receiving the full low end signal. No crossovers between them.) 1x JBL 4645C clone 2x Martycubes with Dayton HO 18's 1x 25Hz ported box with 2 Infinity 1260W's 1x...

Hello guys I have a couple of questions when EQing my system. I use 100% parametric EQ for my whole system which consists of: 2 x passive sub woofers powered and EQ'ed by a inuke 6000DSP Receiver is a Yamaha RX-2040 used for EQ'ing the main speakers. When i EQ the subwoofers i set the LFP...

Here is the first measurements I have made with my DSP. I ran two flat sweeps with no EQ. Then ran the EQ utility in REW and ran again. I'm seeing very little change. Thinking I could possibly be doing something wrong. I am running the sweep with the Main towers operation with a Xover at 100Hz...

While a REW newbie, I've been making measurements and some progress using EQ. But I am stymied by the fact that REW seems to insist on choosing the frequencies for filters. I have a NAD C390DD all-digital amp (no analog inputs) that includes a rudimentary room equalization capability. It has 6...

Hi all, new REW user here! I did my first EQ of my computer desktop speakers with Equalizer APO. I had to create a +20dB house curve in order to make everything sound "flat" to my ears. Probably cause my ears are like 1m away from the mini-speakers. Everything sounds incredibly good now...

I'm not sure this is the best subforum for this discussion so apologies if I've posted in the wrong place... I've been talking to a couple of friends who are in "Pro audio" circles and have studied the subject in incredible depth at university and they're both incredibly skeptical about using...

I am looking at a few option for eq'ing my sub. Options are the Minidsp, the behringer feedback destroyer or just buying the inuke 1000dsp and using its functions. I have been reviewing the information on both the mini dsp and feedback destroyer for the past few weeks and have hit a stand...

Hi all, I needed some help getting my EQ set up for my DIY Shiva-X subwoofer. I tried to include all the needed details below. Thanks in advance for the help! My DIY subwoofer is built around a Shiva X driver (note: the original, not the X-2), and the design is a 6.5 cu ft. box, with two 4"...

....Anybody watch this interview about EQ ?? http://www.avsforum.com/t/1478854/the-science-of-the-room-with-paul-hales

Hi Alot of people say to use the RTA vs Frequency Response to EQ speakers, is it because it is more accurate or just more convient? Also after reading some threads there are different takes on the way to EQ main speakers. 1. EQ combined 2. EQ individual 3. EQ individual then combined 3. EQ...

I have recently purchased a miniDSP and have been using REW for about 4 weeks and both are excellent products. I have a Dayton Audio calibration mic , balanced <-> USB preamp and both mic and soundcard calibration files have been added. I have generated a Pink Noise ( periodic noise ) CD so I...

Got a BFD but just started reading about its weak SNR ratio which makes it less than ideal for full-range EQing. http://www.minidsp.com/onlinestore/browse/15-minidsp-in-a-box?sef=hc Seems like a pretty cool idea...being able to access it via USB and some software to make corrections. Still...

Hi all forum mates, I am new to this forum, and a very warm regards. I am a total wanna be enthusiast in the HT domain, i have committed the original sin by getting all the good stuff that is required to rock my world, and barely know how to use it properly. But having high hopes of learning...

I have a receiver with audyssey.....and I really like some of what it does but hate some of the other things it does.... for example--- I like how it softens the over all sound. But dislike that it takes away the midrange from my center channel forcing me to turn it up 6-7db louder than my mains...

Hi guys, I'm looking for a parametric EQ to use with my guitar rack. I'm not after any PEQ becouse my idea is to mimic cabinet impulse responses with it. I know it's weird but stay with me as I try to explain. My lead sound relies on a tiny cabinet with a 10" speaker but that is the only sound...

Hello... i´ve spend a lot time here and in my little mixing room trying to correct the response with an parametric EQ. I have corrected the complete bass with 3 bands and used two more narrow bands for correcting two peaks @ 200Hz(3-4db) and 430HZ(4-5db). The Bass sounds really good after...

Hello... i´ve spend a lot time here and in my little mixing room trying to correct the response with an parametric EQ. I have corrected the complete bass with 3 bands and used two more narrow bands for correcting two peaks @ 200Hz(3-4db) and 430HZ(4-5db). The Bass sounds really good after...

I just got a BFD 1124P and was wondering if it would be difficult to integrate a mid-bass module. From reading on this forum, the idea doesn’t appear to be that popular. There are a lot of positive feedbacks over on the HSU forum. Individuals who’ve tried it seem to have been blown away...