Home Theater Forum and Systems banner


  1. Epson EH TW6700 Auto Iris Error

    Home Theater Projectors
    Hi, A few weeks ago my epson projector, just over night when i left it on, decided it didn't want to work anymore and had an auto iris fault. I checked online and saw that the local repair centre was 3 hours away with £400 fees with no guarantee on fixing it so I thought id try repair it myself...
  2. Loop delay error

    REW Forum
    Hi, I have made a lot of measurement and have been struggling to properly measure the delay between Right and Left subs. Since I have a Behringer UMC22 soundcard Dayton mic I have the option to both run Acoustic reference and Loopback reference. I use a minidsp 2x4 balanced between a Marantz...
  3. Getting an error msg??

    REW Forum
    Last weekend, I had REW working fine. :smile: This evening, I cannot do a measurement - I have tried about 10 times but I always get the error msg shown in the first attachment. The window I get before the error msg shows up, is given in attachment #2. But the external soundcard is producing...
  4. Error installing REW 5.18

    REW Forum
    Hello, I am trying to install REW on a Windows 10 computer. Windows installation is fresh (a few weeks old). Java is installed, but whether I try to install the version with JRE or without it, I immediately get an error upon running the executable. It says "An internal error occurred (error...
  5. Onkyo 818 error?

    Home Theater Receivers | Processors | Amps
    My front high speaker keeps getting error not connected during audyssee xt32 yet it is connected and has sound ... due to a previous set up that worked? why is the speaker not registering? it is connected yet xt32 says error for front height. I even get sound from it!!when watching movies /...
  6. Why is Rew throwing javax error with Umm-6

    REW Forum
    I was setting up for a 4th round of measurements and the program kept throwing this error and wouldn't recognize the mic. Typically I plug the mic into the laptop and start Rew....and a window pops up 'Rew has found Umm-6 mic, would you like to use it?' And it's right after saying yes that it...
  7. Help with Sharp Aquos led error codes

    My Sharp Aquos TV has recently started blinking error codes when powered on. From standby the green power led comes on briefly then is replaced by the red led flashing twice. This then repeats. If you hit the power on from the remote when the second red led blinks it will power on. Any...
  8. Thread started by error

    My mistake, can you please delete this?
  9. SPL calibration not saved (user error? bug?)

    REW Forum
    Greetings. The SPL calibration for my measurement mic is not being saved after I exit REW. I can run the SPL calibration from the meter screen (using a CheckMate SPL meter to measure level at the mic) which turns the red numbers on the meter to white, but if I close REW and open it again the...
  10. Setup REW 5.12 today with new Umik 1 and getting an error

    REW Forum
    I went thru the "Getting Started With REW PDF" line by line for HDMI, and when I get to the point to calibrate the SPL meter I get an Asio driver error. Attaching pics to try and help. Dell XPS Laptop Win 8.1 Pro 64 bit 8 gigs ram HDMI from laptop to Marantz Preamp USB to Umik 1 from Cross...
  11. Inuke 3000 - Is it faulty or user error

    Subwoofer Amps | High Pass Filters
    Hi, I know there are lots of inuke threads already but I was hoping someone could help me. I have an inuke powering a sunfire hrs12 subwoofer that had a faulty amp. Sunfire say the driver is 4 ohm and the amp was 1000rms. It has worked but never as well as the original amp. I have now...
  12. Umik Mic and REW - Input Device Error

    REW Forum
    Hi All, I have 2 issues with the Umik Mic . I am a new user to the Umik-1 mic and the REW software. I tried to use the Umik mic to measure the ambient noise level by taking the reading from the REW SPL meter indicator. I have downloaded the mic txt calibration file but the software will...
  13. noise error

    New Member Introductions
    HI fm COLORADO I am new to this so please excuse my naivety. I just set up a Home theater using a Onkyo HT-S5100 and while using the Audessy 2EQ to setup the listening positions I keep getting an "NOISE ERROR" on the 3rd position. What does that mean and how can I overcome it? I have tried...
  14. oppo bpd 93eu, error

    General Service and Technical Information
    HEy guys, I'm in trouble and need a bit of assistance :( just bought divergent and the amazing spiderman 2. neither of those movies will load. it loads the rest of my blurays without problems. divergent is a 2 disc with special features on second disc. movie disc fails on loading display says...
  15. Onkyo tx-nr809 - Problems - Check Sp Wire error - Recommendation on NEW Receiver Needed

    Home Theater Receivers | Processors | Amps
    This may not be allowed here but my frustrations has led me here. After problems with my onkyo tx-nr809 with no sound I had to send the unit to Onkyo for repair. I just got it back, hooked it up, run calibration on it to set the speakers only to have the receive shutdown. Now all I get is the...
  16. Error message

    REW Forum
    Error message (FIXED) Hello folks, I have run REW many times before, and I am fairly proficient, but now when I try to run REW I get this error message: ERROR #10: A Java Runtime Environment for 'roomeqwizard.exe' cannot be found. A Java Runtime Environment needs to be installed before 'Room...
  17. Java Error #52

    REW Forum
    Hi, today i started the room eq wizard and i get a java error #52. I tryed to uninstall, same error, i tryed to install a new version, same error... Newest java is already installed. Have windows 7 64 Bit installed. Anyone a idea ?!
  18. Error in Beginning Calibration with HDMI/USB UMIK-1

    REW Forum
    I received a calibrated MiniDSP UMIK-1. My current setup: Running HDMI out from pc laptop (HP Pavillion dv6) to HDMI input of Emotiva UMC-200 using a monoprice high performance (30 ft) cable...also troubleshooted with regular 5 foot hdmi cable. I installed asio4all support, umik driver...
  19. Calibration Very Low Signal on Measured error

    REW Forum
    I am a noob to REW and am trying to get set up. Every time I try to calibrate I come up with an error that says The highest level in the measured input is -80.8 db FS It says it is much lower than it should be etc. It looks like my levels were matched. Am I doing something wrong?
  20. Input Device Error when using UMIK-1 mic from MiniDSP

    REW Forum
    Hello to all! When usin Umik-1 with REW, last beta version, got the following error: Can anyone help? I am using Linn Songcast as a "virtual" sound card; works fine in the previous version of REW. Input device error Message: javax.sound.sampled.LineUnavailableException: Microphone...