Home Theater Forum and Systems banner
existing
21-31 of 31 Results
  1. Home Theater System Recommendations
    HI Guys/Gals I am a newbie,and had a complete HT installed 10 yrs ago with Main Theater,multiple TV's,and sound system on two other levels(theater room,main living area and pool) We have decided to upgrade to new LCD high-def flat panals(old TV was boxed in Rear-projection floor model...lol)...
  2. DIY Subwoofers - General Discussion
    Hi HTS! :wave: I actually joined this forum using the iPhone app first, now I'm here with my first post. So I was wondering if I could modify my existing PA-120 (12"/250w) by changing the woofer (Dayton Audio RSS315HO-4 12") and amp (Bash 500W) with better components from say parts-express and...
  3. REW Forum
    Up until recently I didn't have an SPL meter, so I did all my mic measurements without having SPL calibrated (SPL target was set to 75db). I just got a meter and found that my measurement level was actually 79.5db. Can I add this value to my previous measurements to correct them? I note that...
  4. Sealed Subwoofer Build Projects
    I have a Dayton DVC 8ohm Sub and a free plate amp 10x10 face [email protected] I'm willing to buy and found a Dayton Audio SD215-PR 8" Passive Radiator $15.00 to make a sealed box. I ran the specs on Bass Box and heres what I have so far. How can I optimize the box and or passive to get this looking...
  5. SVSound
    Hi all, I am the proud owner of dual 20-39 PC+ cylinders, but am looking at the possibility of adding two more cylinders to the family. My HT room is approx. 3650 ft^3, and I run both cylinders in the 20Hz tune. There have been several times where I feel that I am pushing the subs a little...
  6. Ported Subwoofer Build Projects
    I have 2 4 inch ports and they are fine except for when (the only time I notice) I watch Hitchhiker's guide to the Galaxy and the earth explodes. I am not sure the frequency but I can hear the port. the ports are PVC and the box is MDF. Is there an easy way to add flares that are large enough...
  7. DIY Subwoofers - General Discussion
    I have a def tech PRO 1000 10" subwoofer and want to upgrade badly but wife + budget = squat. Could/should I remove the 10" woofer and replace it with another 10" woofer and possibly another amp? Just wanted to see what options I have and if these mods would be worth the effort. 40% movies/...
  8. DIY Speakers
    I recently moved into a new office space. There are speakers installed throughout the office, with volume controls for each room located in central mechanical space. Before purchasing the office space, I noticed that the prior tenant had a receiver located in this room, which he ran satellite...
  9. Home Theater Design and Construction
    Anyone have any suggestions for how to install a run of Inch and a half conduit horizontally, about 5-6 feet, through an insulated exterior wall ? :dontknow: I have a TV that is to be mounted on a wall directly above an in-wall gas fireplace so i cannot go straight down to the crawlspace...
  10. DIY Subwoofers - General Discussion
    I have a 10yr old HSU Research 12V sub that works fine...infact it is a surprise how well it works compared to many not only more costly units but newer ones aswell but still I wonder if it could be improoved with a new driver and such but use same cabinet. The sub stats are a 12in Impregnated...
  11. DIY Speakers
    I lead the sound team at my church. We all hate our stupid monitor wedges. Our Ashley EQ's do a wonderful job at cleaning them up but you can see the attached pictures of what it takes to clean up the sound, but they only help so much. We currently slam off the lows just to clean up the sound...
21-31 of 31 Results
Top