Search Results for ‘external’

i need a dvdo external scaler that will do 2.35.1 aspect rato with a benq 2150st projector i want to connect the scaler to my panasonic ub900 4k player the benq 2150st only supports asper ratios up to 16.9 i want to use it onmy very large shermin williams painted wall the projector is short...

I wanted to use REW to do some RTA in my room. My laptop had a hdmi out but the on board sound ship inly supports 2 channel out. There is no setting to switch the inboard sound into a 7.1 mode. Anyone have good recommendations on and external card with and hdmi out?

Hi all, browsed through the threads here and the sticky soundcard database and did a quick search but wasn't sure I got a good handle on the options. Looking for an external USB soundcard with mic preamp/phantom that I intend to use with a miniDSP. I will ultimately be feeding all miniDSP...

hi i have the ysp 2500 soundbar i want to use an external high end quality sub that bass will go very low thuderous bass that can make you literaly jump out of your chair what subs do anybody recommend to use with the sound bar as the wireless soundbar is not bone jarring enougth need help on...

Sorry for the noob questions but first time working with REW. I have ordered a UMIK-1 microphone and plan to use it with REW on my laptop. The best and easiest test signal I can play is white noise from a file via my music server. This will take in the full two-channel reproduction chain from...

I have a PA speaker which is rated at 3ohm 160 RMS. I have it running with a receiver at 3ohm 170 RMS. I would like to add an external tweeter because the speaker itself doesn't sound with clarity. The tweeter I want to add handle 4ohm or 8ohm at 70 RMS. So I was planning on wiring it with a...

Greetings I am new to this forum & looking for your opinions. I am using an OPPO 105d directly connected to Bryston 4bsst with xlr cables so no external preamp. The Bryston is driving Goldenear Triton Ones. I usually play high resolution flac music in pure direct mode & I am happy with the...

Hi everybody - my first post and I am looking for help. I decided to jump into room mesurement with the aim to do room treatment and some signal correction through miniDSP. I downloaded REW on my old laptop to discover that it is not 5.1 or 7.1 capable. OK, I bought an external sound card...

Difference; Internal Vs External Cal Sweep: Maybe someone can help explain the source of an issue I have been struggling with. I need a wav file for both the REW 44kHz calibration sweep and the REW measurement sweep I use (12-20k). Background: I have noted for that SPL and phase responses...

Is there a way to do a frequency sweep in REW when the pink noise is generated off a disc and played on the test system. Richard

Hi. I have a simple question. I want to measure a so called room correction plug in which I use in Logic. If I use the plug in system wide I have to route the input of my interface to the output. With this I cant do measurements anymore because I would get a feedback. Is there an external...

I have a Denon avr-x3000 and am wondering the best easiest route for further subwoofer eq... The Receiver has Audyssey multieq xt and does an ok job but the subwoofer area it seems to lack... boomy peaks here and there... Is it time to upgrade to a Audyssey Multieq xt32 with sub ht reciever...

I have an UMIK-1 microphone, which is a USB microphone that comes with a calibration file. I know there is no way to calibrate your sound card in REW when using a USB mic, but I get the feeling that the output on my internal sound card on my Dell Inspiron 5520 is not the best. I think this...

I am stumped about a hum when watching a light-colored image on my 65VT60. I've read about humming plasmas, ground loops, bad transformers, and so forth, but this hum is coming from my front speakers. I am unsure where to start diagnosis, because the hum does not come from the transformer area...

So I was thinking, how much do external noises effect the auto room EQ setup sequences on receivers (Audyssey MCACC YPAO and so forth) . Have you ever been running through all 6-8 position's and on the second or third last run through someone drives by on a Harley and disrupts the entire...

Hi All, I've spent a few hours researching this, but if the info is listed somewhere else, I apologize for missing it. I am a newbie with REW, and am planning on using it with one of Cross-Spectrum Labs calibrated mics. When calibrating REW via loopback, my setup deviates from what is covered...

Hi, This is the first time I'm using REW. I've setup my Sound card calibration and loaded my microphone's cal file as well. Now I'm at the point of "checking levels"... Do I HAVE to have an external SPL meter in order to set the levels and use the software? Regards,

I'm new to REW, so a quick question or two: I've got several older laptops (3-4 yrs) around and was hoping to use these as they are fairly small/portable. 1) In "Calibrating" the sound card, how does REW know if the FR errors it is experiencing (with the loop-through cable, during calibration)...

Just curious.......wondering how many of the HTS faithful are using external amps to power their systems through an AVR? If so, are you using them to provide dynamic capability that the AVR cannot ( for you) or for some other reason ( electrostatic speakers, low impedance speakers, etc.)? I am...